Asus K8V SE DELUXE K8V SE Deluxe User's Manual - Page 45

2. Floppy disk drive connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug). PIN 1 FLOPPY NOTE: Orient the red markings on K8V the floppy ribbon cable to PIN 1. ® K8V SE Deluxe Floppy Disk Drive Connector 3. RAID ATA connector (40-1 pin PRI_RAID) This connector supports either RAID 0, RAID 1 or RAID 0 + 1 configuration with the Serial ATA connectors through the onboard Promise® PDC20378 controller. You can use the RAID feature to set up a disk array configuration and to support additional IDE devices. K8V PRI_RAID PIN 1 ® NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. K8V SE Deluxe RAID Connectors Important notes on the RAID feature: • By default, the drive that you connect to the primary connector follows the ATA133/100/66/33 protocol as an independent drive, not as a disk array. • The RAID/SATA controller chipset does not support ATAPI devices such as CD-ROMs, DVD-ROMs, etc. • Refer to sections "5.6 Promise® RAID Configurations" and "5.7 VIA RAID Configurations" for details. ASUS K8V SE Deluxe motherboard 2-23