Asus K8V SE DELUXE K8V SE Deluxe User's Manual - Page 92

JumperFree Configuration

Page 92 highlights

Palette Snooping [Disabled] When set to [Enabled], the pallete snooping feature informs the PCI devices that an ISA graphics device is installed in the system so that the latter can function correctly. Setting to [Disabled] deactivates this feature. Configuration options: [Disabled] [Enabled] IRQ xx [Available] When set to [Available], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [Available] [Reserved] 4.4.5 JumperFree Configuration Configure System Frequency/Voltage CPU FSB Frequency CPU Speed/Voltage Setting DDR Voltage AGP Voltage V-Link Voltage Performance Mode [200 MHz] [Auto] [Auto] [1.5V] [2.5V] [Auto] CPU FSB Frequency [200MHz] This item allows you to adjust the CPU FSB operating frequency. Configuration options: [200MHz] [201 MHz] ~ [300MHz] CPU Speed/Voltage Setting [Auto] This item allows you to set a specific VCore offset voltage. Configuration options: [Auto] [Manual] CPU Speed [800 MHz] Allows you to manually set the CPU speed. This item appears only when the CPU Speed/Voltage Setting item is set to Manual. Configuration options: [800 MHz] [900 MHz] [1000 MHz] [1100 MHz] [1200 MHz] [1300 MHz] [1400 MHz] [1500 MHz] [1600 MHz] [1700 MHz] [1800 MHz] [1900 MHz] [2000 MHz] 4-26 Chapter 4: BIOS Setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140

4-26
Chapter 4: BIOS Setup
4.4.5
JumperFree Configuration
Palette Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Setting to [Disabled] deactivates this feature.
Configuration options: [Disabled] [Enabled]
IRQ xx [Available]
When set to [Available], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [Available] [Reserved]
CPU FSB Frequency [200MHz]
This item allows you to adjust the CPU FSB operating frequency.
Configuration options: [200MHz] [201 MHz] ~
[300MHz]
CPU Speed/Voltage Setting [Auto]
This item allows you to set
a specific VCore offset voltage.
Configuration options: [Auto] [Manual]
CPU Speed [800 MHz]
Allows you to manually set the CPU speed. This item appears only when
the
CPU Speed/Voltage Setting
item is set to Manual.
Configuration options: [800 MHz] [900 MHz] [1000 MHz] [1100 MHz]
[1200 MHz] [1300 MHz] [1400 MHz] [1500 MHz] [1600 MHz] [1700 MHz]
[1800 MHz] [1900 MHz] [2000 MHz]
Configure System Frequency/Voltage
CPU FSB Frequency
[200 MHz]
CPU Speed/Voltage Setting
[Auto]
DDR Voltage
[Auto]
AGP Voltage
[1.5V]
V-Link Voltage
[2.5V]
Performance Mode
[Auto]