Asus P5BV-C User Guide - Page 40
RAID controller selection 3-pin RAID_SEL1, Force BIOS recovery setting 3-pin RECOVERY1 - 4l bios update
UPC - 610839157372
View all Asus P5BV-C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. RAID controller selection (3-pin RAID_SEL1) This jumper allows you to select the RAID configuration utility to use when you create disk arrays. Place the jumper caps over pins 1-2 if you want to use the LSI Logic Embedded SATA RAID Setup Utility (default). Otherwise, place the jumper caps to pins 2-3 to use the Intel® Matrix Storage Manager. ® P5BV-C/4L RAID_SEL1 12 23 LSI RAID ROM INTEL RAID ROM (Default) P5BV-C/4L RAID_SEL1 Setting 3. Force BIOS recovery setting (3-pin RECOVERY1) This jumper allows you to quickly update or recover the BIOS when it gets corrupted. To update the BIOS: 1. Prepare a floppy disk that contains the latest BIOS for the motherboard (xxxx-xxx.ROM) and the AFUDOS.EXE utility. 2. Set the jumper to pins 2-3. 3. Insert the floppy disk then turn on the system to update the BIOS. 4. Shut down the system. 5. Set the jumper back to pins 1-2. 6. Turn on the system. ® P5BV-C/4L RECOVERY1 12 23 Normal (Default) BIOS recovery P5BV-C/4L BIOS Recovery Setting 2-20 Chapter 2: Hardware information