Asus P5BV-C User Guide - Page 74

4.4.2 Remote Access Configuration The items in this menu allows you to configure the Remote Access features. Select an item then press to display the configuration options. Advanced BIOS SETUP UTILITY Configure Remote Access type and parameters Select MPS Revision. Select Remote Access type. Remote Access Serial port number Base Address, IRQ Serial Port Mode Flow Control Redirection After BIOS POST Terminal Type VT-UTF8 Combo Key Support [Enabled] [COM1] [3F8h,4] [115200 8, n,1] [None] [Always] [ANSI] [Enabled] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC SEexlietct Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2007, American Megatrends, Inc. Remote Access [Disabled] Enables or disables the remote access feature. Configuration options: [Disabled] [Enabled] The following items appear only when the Remote Access item is set to [Enabled]. Serial port number [COM1] Allows you to select a serial port for console redirection. Configuration options: [COM1] [COM2] Serial Port Mode [115200 8, n,1] Allows you to select a serial port mode. Configuration options: [115200 8,n,1] [57600 8,n,1] [38400 8,n,1] [19200 8,n,1] [09600 8,n,1] Flow Control [None] Allows you to set the flow control for console redirection. Configuration options: [None] [Hardware] [Software] Redirection After BIOS POST [Always] Sets the redirection mode after the BIOS Power-On Self-Test (POST). Some operating systems may not work when this item is set to Always. Configuration options: [Disabled] [Boot Loader] [Always] Terminal Type [ANSI] Allows you to select the target terminal type. Configuration options: [ANSI] [VT100] [VT-UTF8] 4-16 Chapter 4: BIOS setup