Home » Asus Manuals » Motherboards » Asus P5Q » Manual Viewer

Asus P5Q User Manual - Page 91

CPU Configuration, TPM Enable / Disable Status [No State], TPM Owner Status [No State]

UPC - 610839163014

Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

TPM Enable / Disable Status [No State] The item is not configurable. TPM Owner Status [No State] The item is not configurable To enable the TPM function, set the Execute TPM Command item to [Enabled] and then save the change (see 3.9 Exit menu for details). After the system reboots, the TPM Configuration menu will change into the following one. BIOS SETUP UTILITY Advanced TPM Configuration Execute TPM Command TPM Enable/Disable Status Clearing the TPM TPM Owner Status [Last setting] [Enabled] [Press Enter] [UnOwned] Enable (Activate)/ Disable (Deactivate) Command to TPM Clearing the TPM [Press Enter] Allows you to clear the user information saved in the TPM security chip. When you press , a warning message will appear to ask if you want to clear the user information in the security chip. Use the left/right arrow key to select between [OK] and [Cancel], and then press to confirm your choice. After you select [OK] to execute the Clearing the TPM function, the data saved in the TPM security chip will be cleared and can never be restored. 3.5.2 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. The items shown in this screen may be different due to the CPU you installed. BIOS SETUP UTILITY Advanced Configure advanced CPU settings Manufacturer:Intel Brand String:Intel(R) CPU 3.60GHz Frequency :3.60GHz FSB Speed :800MHz Cache L1 :32 KB Cache L2 :4096 KB CPUID :6F9 Ratio Status:Unlocked (Min:12, Max:18) Ratio Actual Value :18 CPUID :F64 Ratio CMOS Setting [Auto] C1E Support [Enabled] Max CPUID Value Limit [Disabled] Intel(R) Virtualization Tech [Enabled] CPU TM Function [Enabled] Execute Disable Bit [Enabled] Intel(R) SpeedStep(TM) Tech [Enabled] Sets the ratio between CPU Core Clock and the FSB Frequency. NOTE: If an invalid ratio is set in CMOS then actual and setpoint values may differ. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. ASUS P5Q 3-25

Section	Page
Contents	3
Notices	8
Safety information	9
About this guide	10
P5Q specifications summary	12
Chapter 1: Product introduction	15
1.1 Welcome!	17
1.2 Package contents	17
1.3 Special features	18
1.3.1 Product highlights	18
1.3.2 ASUS special features	19
1.3.3 ASUS Exclusive Overclocking Features	23
Chapter 2: Hardware information	25
2.1 Before you proceed	27
2.2 Motherboard overview	28
2.2.1 Motherboard layout	28
2.2.2 Layout contents	29
2.2.3 Placement direction	30
2.2.4 Screw holes	30
2.3 Central Processing Unit (CPU)	31
2.3.1 Installing the CPU	32
2.3.2 Installing the CPU heatsink and fan	35
2.3.3 Uninstalling the CPU heatsink and fan	36
2.4 System memory	37
2.4.1 Overview	37
2.4.2 Memory configurations	38
2.4.3 Installing a DIMM	42
2.4.4 Removing a DIMM	42
2.5 Expansion slots	43
2.5.1 Installing an expansion card	43
2.5.2 Configuring an expansion card	43
2.5.3 Interrupt assignments	44
2.5.4 PCI slots	45
2.5.5 PCI Express x1 slots	45
2.5.6 PCI Express 2.0 x16 slot (blue)	45
2.6 Jumper	46
2.7 Connectors	49
2.7.1 Rear panel connectors	49
2.7.2 Internal connectors	51
2.8 Starting up for the first time	63
2.9 Turning off the computer	64
2.9.1 Using the OS shut down function	64
2.9.2 Using the dual function power switch	64
Chapter 3: BIOS setup	65
3.1 Managing and updating your BIOS	67
3.1.1 ASUS Update utility	67
3.1.2 Creating a bootable floppy disk	70
3.1.3 ASUS EZ Flash 2 utility	71
3.1.4 AFUDOS utility	72
3.1.5 ASUS CrashFree BIOS 3 utility	74
3.2 BIOS setup program	75
3.2.1 BIOS menu screen	76
3.2.2 Menu bar	76
3.2.3 Navigation keys	76
3.2.4 Menu items	77
3.2.5 Sub-menu items	77
3.2.6 Configuration fields	77
3.2.7 Pop-up window	77
3.2.8 Scroll bar	77
3.2.9 General help	77
3.3 Main menu	78
3.3.1 System Time [xx:xx:xx]	78
3.3.2 System Date [Day xx/xx/xxxx]	78
3.3.3 Legacy Diskette A [1.44M, 3.5 in.]	78
3.3.4 Language [English]	78
3.3.5 SATA 1–6	79
3.3.6 Storage Configuration	80
3.3.7 AHCI Configuration	81
3.3.8 System Information	82
3.4 Ai Tweaker menu	83
3.4.1 Ai Overclock Tuner [Auto]	83
3.4.2 CPU Ratio Setting [Auto]	84
3.4.3 FSB Strap to North Bridge [Auto]	84
3.4.4 DRAM Frequency [Auto]	84
3.4.5 DRAM Timing Control [Auto]	85
3.4.6 DRAM Static Read Control [Auto]	86
3.4.7 DRAM Read Training [Auto]	86
3.4.8 MEM. OC Charger [Auto]	86
3.4.9 Ai Clock Twister [Auto]	86
3.4.10 Ai Transaction Booster [Auto]	87
3.4.11 CPU Voltage [Auto]	87
3.4.12 CPU PLL Voltage [Auto]	87
3.4.13 FSB Termination Voltage [Auto]	87
3.4.14 DRAM Voltage [Auto]	88
3.4.15 NB Voltage [Auto]	88
3.4.16 SB Voltage [Auto]	88
3.4.17 PCIE SATA Voltage [Auto]	88
3.4.18 Load-Line Calibration [Auto]	89
3.4.19 CPU Spread Spectrum [Auto]	89
3.4.20 PCIE Spread Spectrum [Auto]	89
3.5 Advanced menu	90
3.5.1 TPM Configuration	90
3.5.2 CPU Configuration	91
3.5.3 Chipset	93
3.5.4 Onboard Devices Configuration	94
3.5.5 USB Configuration	95
3.5.6 PCIPnP	96
3.6 Power menu	97
3.6.1 Suspend Mode [Auto]	97
3.6.2 Repost Video on S3 Resume [No]	97
3.6.3 ACPI 2.0 Support [Disabled]	97
3.6.4 ACPI APIC Support [Enabled]	97
3.6.5 APM Configuration	98
3.6.6 Hardware Monitor	99
3.7 Boot menu	101
3.7.1 Boot Device Priority	101
3.7.2 Boot Settings Configuration	102
3.7.3 Security	103
3.8 Tools menu	105
3.8.1 ASUS EZ Flash 2	105
3.8.2 Drive Xpert Control [Auto]	106
3.8.3 Drive Xpert Mode Update [Last Setting]	106
3.8.4 Express Gate	107
3.8.5 ASUS O.C. Profile	108
3.8.6 AI Net 2	109
3.9 Exit menu	110
Chapter 4: Software support	111
4.1 Installing an operating system	113
4.2 Support DVD information	113
4.2.1 Running the support DVD	113
4.2.2 Drivers menu	114
4.2.3 Utilities menu	115
4.2.4 Make disk menu	117
4.2.5 Manual menu	118
4.2.6 ASUS Contact information	118
4.2.7 Other information	119
4.3 Software information	121
4.3.1 ASUS MyLogo2™	121
4.3.2 AI NET2	123
4.3.3 ASUS PC Probe II	124
4.3.4 ASUS AI Suite	130
4.3.5 ASUS AI Nap	132
4.3.6 ASUS Fan Xpert	133
4.3.7 ASUS AI Booster	135
4.3.8 ASUS EPU-6 Engine	136
4.3.9 ASUS AI Direct Link	140
4.3.10 Audio configurations	142
4.3.11 ASUS Drive Xpert	146
4.3.12 ASUS Express Gate	157
4.4 RAID configurations	167
4.4.1 RAID definitions	167
4.4.2 Installing Serial ATA hard disks	168
4.4.3 Intel® RAID configurations	168
4.5 Creating a RAID driver disk	176
4.5.1 Creating a RAID driver disk without entering the OS	176
4.5.2 Creating a RAID driver disk in Windows®	176
Appendix: CPU features	179
A.1 Intel® EM64T	181
Using the Intel® EM64T feature	181
A.2 Enhanced Intel SpeedStep® Technology (EIST)	181
A.2.1 System requirements	181
A.2.2 Using the EIST	182
A.3 Intel® Hyper-Threading Technology	183

Match case Limit results 1 per page

ASUS P5Q

3-25

Select Screen

Select Item

Change Option

General Help

F10

Save and Exit

ESC

Exit

Conﬁgure advanced CPU settings

Manufacturer:Intel

Brand String:Intel(R) CPU 3.60GHz

Frequency

:3.60GHz

FSB Speed

:800MHz

Cache L1

:32 KB

Cache L2

:4096 KB

CPUID

:6F9

Ratio Status:Unlocked (Min:12, Max:18)

Ratio Actual Value :18

CPUID

:F64

Ratio CMOS Setting

[Auto]

C1E Support

[Enabled]

Max CPUID Value Limit

[Disabled]

Intel(R) Virtualization Tech [Enabled]

CPU TM Function

[Enabled]

Execute Disable Bit

[Enabled]

Intel(R) SpeedStep(TM) Tech

[Enabled]

Sets the ratio between

CPU Core Clock and the

FSB Frequency.

NOTE: If an invalid

ratio is set in CMOS

then actual and

setpoint values may

differ.

BIOS SETUP UTILITY

Advanced

TPM Enable / Disable Status [No State]

The item is not conﬁgurable.

TPM Owner Status [No State]

The item is not conﬁgurable

To enable the TPM function, set the

Execute TPM Command

item to [Enabled]

and then save the change (see

3.9 Exit menu

for details). After the system

reboots, the TPM Conﬁguration menu will change into the following one.

TPM Conﬁguration

Execute TPM Command

[Last setting]

TPM Enable/Disable Status

[Enabled]

Clearing the TPM

[Press Enter]

TPM Owner Status

[UnOwned]

Enable (Activate)/

Disable (Deactivate)

Command to TPM

BIOS SETUP UTILITY

Advanced

Clearing the TPM [Press Enter]

Allows you to clear the user information saved in the TPM security chip. When

you press <Enter>, a warning message will appear to ask if you want to clear

the user information in the security chip. Use the left/right arrow key to select

between [OK] and [Cancel], and then press <Enter> to conﬁrm your choice.

After you select [OK] to execute the

Clearing the TPM

function, the data saved

in the TPM security chip will be cleared and can never be restored.

3.5.2

CPU Conﬁguration

The items in this menu show the CPU-related information that the BIOS

automatically detects.

The items shown in this screen may be different due to the CPU you installed.