Home » Asus Manuals » Motherboards » Asus P7P55D Deluxe » Manual Viewer

Asus P7P55D Deluxe User Manual - Page 72

Main menu

UPC - 610839172450

Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

3.4 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. You can also set the system time and date and BIOS language in this menu. Refer to 3.3.1 BIOS menu screen for information on the menu screen items and how to navigate through them. Main Ai Tweaker BIOS SETUP UTILITY Advanced Power Boot System Time [13:51:25] System Date [Thu 07/09/2009] Language [English] SATA1 SATA2 SATA3 SATA4 SATA5 SATA6 Storage Configuration �S�ys�t�e�m��I�n�f�o�r�m�a�t�i�o�n� [HDT722516DLA380] [Not Detected] [ATAPI DVD DH1] [Not Detected] [Not Detected] [Not Detected] Tools Exit Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system Date. ←→ Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2009, American Megatrends, Inc. 3.4.1 SATA 1-6 While entering Setup, the BIOS automatically detects the presence of SATA devices. There is a separate submenu for each SATA device. Select a device item then press to display the SATA device information. Main BIOS SETUP UTILITY SATA 1 Device : Hard Disk Vendor : HDT722516DLA380 Size : 164.7GB LBA Mode : Supported Block Mode : 16Sectors PIO Mode : 4 Async DMA : MultiWord DMA-2 Ultra DMA : Ultra DMA-5 SMART Monitoring:Supported Type LBA/Large Mode Block(Multi-Sector Transfer)M PIO Mode DMA Mode SMART Monitoring 32Bit Data Transfer [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Enabled] Select the type of device connected to the system. ←→ Select Screen ↑↓ Select Item +- Change Field F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2009, American Megatrends, Inc. The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These values are not user-configurable. These items show N/A if no SATA device is installed in the system. Chapter 3 3-8 Chapter 3: BIOS setup

Section	Page
P7P55D Deluxe specifications summary	12
Chapter 1: Product introduction	15
1.1 Welcome!	15
1.2 Package contents	15
1.3 Special features	16
1.3.1 Product highlights	16
1.3.2 ASUS Xtreme Design—Hybrid Processor	17
1.3.3 ASUS Xtreme Design—Hybrid Phase	17
1.3.4 ASUS Xtreme Design—Hybrid OS	17
1.3.5 ASUS Exclusive Features	18
Chapter 2: Hardware information	21
2.1 Before you proceed	21
2.2 Motherboard overview	22
2.2.1 Motherboard layout	22
2.2.2 Layout contents	23
2.2.3 Placement direction	24
2.2.4 Screw holes	24
2.3 Central Processing Unit (CPU)	25
2.3.1 Installing the CPU	25
2.3.2 Installing the CPU heatsink and fan	28
2.3.3 Uninstalling the CPU heatsink and fan	29
2.4 System memory	30
2.4.1 Overview	30
2.4.2 Memory configurations	31
2.4.3 Installing a DIMM	39
2.4.4 Removing a DIMM	39
2.5 Expansion slots	40
2.5.1 Installing an expansion card	40
2.5.2 Configuring an expansion card	40
2.5.3 Interrupt assignments	41
2.5.4 PCI slots	42
2.5.5 PCI Express 2.0 x1 slots (2.5GT/s)	42
2.5.6 PCI Express 2.0 x16 slots	42
2.6 Onboard switches	44
2.7 Connectors	47
2.7.1 Rear panel connectors	47
2.7.2 Audio I/O connections	48
2.7.3 Internal connectors	51
2.7.4. ASUS Q-Connector (system panel)	61
2.8 Onboard LEDs	62
2.9 Starting up for the first time	63
2.10 Turning off the computer	63
Chapter 3: BIOS setup	65
3.1 Knowing BIOS	65
3.2 Updating BIOS	65
3.2.1 ASUS Update utility	66
3.2.2 ASUS EZ Flash 2 utility	68
3.2.3 ASUS CrashFree BIOS 3 utility	69
3.3 BIOS setup program	70
3.3.1 BIOS menu screen	70
3.3.2 Menu bar	70
3.3.3 Navigation keys	71
3.3.4 Menu items	71
3.3.5 Submenu items	71
3.3.6 Configuration fields	71
3.3.7 Pop-up window	71
3.3.8 Scroll bar	71
3.3.9 General help	71
3.4 Main menu	72
3.4.1 SATA 1-6	72
3.4.2 Storage Configuration	74
3.4.3 AHCI Configuration	74
3.4.4 System Information	75
3.5 Ai Tweaker menu	76
3.5.1 OC Tuner Utility	76
3.5.2 OC Tuner limit Value [Good Performance]	76
3.5.3 Ai Overclock Tuner [Auto]	77
3.5.4 CPU Ratio Setting [Auto]	77
3.5.5 Intel(R) SpeedStep(TM) Tech [Enabled]	78
3.5.6 Intel(R) TurboMode Tech [Enabled]	78
3.5.7 Xtreme Phase Full Power Mode [Auto]	78
3.5.8 DRAM Frequency [Auto]	78
3.5.9. DRAM Timing Control [Auto]	78
3.5.10 CPU Differential Amplitude [Auto]	80
3.5.11 CPU Clock Skew [Auto]	80
3.5.12 CPU Voltage Mode [Offset]	80
3.5.13 IMC Voltage [Auto]	81
3.5.14 DRAM Voltage [Auto]	81
3.5.15 CPU PLL Voltage [Auto]	81
3.5.16 PCH Voltage [Auto]	82
3.5.17 DRAM DATA REF Voltage on CHA/B [Auto]	82
3.5.18 DRAM CTRL REF Voltage on CHA/B [Auto]	82
3.5.19 Load-Line Calibration [Auto]	82
3.5.20 CPU Spread Spectrum [Auto]	82
3.5.21 PCIE Spread Spectrum [Auto]	82
3.6 Advanced menu	83
3.6.1 CPU Configuration	83
3.6.2 North Bridge Configuration	85
3.6.3 Onboard Devices Configuration	86
3.6.4 USB Configuration	87
3.6.5 PCIPnP	88
3.6.6 Intel VT-d [Disabled]	88
3.7 Power menu	89
3.7.1 Suspend Mode [Auto]	89
3.7.2 Repost Video on S3 Resume [No]	89
3.7.3 ACPI 2.0 Support [Disabled]	89
3.7.4 ACPI APIC Support [Enabled]	89
3.7.5 EuP Ready [Disabled]	89
3.7.6 APM Configuration	90
3.7.7 Hardware Monitor	91
3.8 Boot menu	93
3.8.1 Boot Device Priority	93
3.8.2 Boot Settings Configuration	94
3.8.3 Security	95
3.9 Tools menu	97
3.9.1 ASUS O.C. Profile	97
3.9.2 Drive Xpert Configuration	98
3.9.3 AI NET 2	100
3.9.4 ASUS EZ Flash 2	100
3.9.5 Express Gate [Auto]	100
3.9.6 ID LED [Enabled]	100
3.10 Exit menu	101
Chapter 4: Software support	103
4.1 Installing an operating system	103
4.2 Support DVD information	103
4.2.1 Running the support DVD	103
4.2.2 Obtaining the software manuals	104
4.3 Software information	105
4.3.1 ASUS PC Probe II	105
4.3.2 ASUS AI Suite	106
4.3.3 ASUS Fan Xpert	107
4.3.4 ASUS EPU-6 Engine	108
4.3.5 ASUS Express Gate	109
4.3.6 VIA® High Definition Audio utility	110
4.3.7 ASUS Drive Xpert	111
4.4 ASUS Unique Overclocking Utility— TurboV EVO	112
4.4.1 Using ASUS TurboV	112
4.4.2 Using ASUS TurboV Auto Tuning Mode	113
4.4.3 Using ASUS Turbo Key	114
4.5 RAID configurations	115
4.5.1 RAID definitions	115
4.5.2 Installing Serial ATA hard disks	116
4.5.3 Setting the RAID item in BIOS	116
4.5.4 Intel® Matrix Storage Manager option ROM utility	116
4.6 Creating a RAID driver disk	120
4.6.1 Creating a RAID driver disk without entering the OS	120
4.6.2 Creating a RAID driver disk in Windows®	120
4.6.3 Installing the RAID driver during Windows® OS installation	121
4.6.4 Using a USB floppy disk drive	121
Chapter 5: Multiple GPU technology support	125
5.1 ATI® CrossFireX™ technology	125
5.1.1 Requirements	125
5.1.2 Before you begin	125
5.1.3 Installing two CrossFireX™ graphics cards	126
5.1.4 Installing three CrossFireX™ graphics cards	127
5.1.5 Installing the device drivers	128
5.1.6 Enabling the ATI® CrossFireX™ technology	128
5.2 NVIDIA® SLI™ technology	130
5.2.1 Requirements	130
5.2.2 Installing two SLI-ready graphics cards	130
5.2.3 Installing the device drivers	131

Match case Limit results 1 per page

3-8

Chapter 3: BIOS setup

Chapter 3

3.4

Main menu

When you enter the BIOS Setup program, the Main menu screen appears, giving you an

overview of the basic system information. You can also set the system time and date and

BIOS language in this menu.

Refer to

3.3.1 BIOS menu

screen

for information on the menu screen items and how to

navigate through them.

3.4.1

SATA 1-6

While entering Setup, the BIOS automatically detects the presence of SATA devices. There

is a separate submenu for each SATA device. Select a device item then press <Enter> to

display the SATA device information.

BIOS SETUP UTILITY

Main

Ai Tweaker

Advanced

Power

Boot

Tools

Exit

Use [ENTER], [TAB]

or [SHIFT-TAB] to

select a ﬁeld.

Use [+] or [-] to

conﬁgure system Date.

←→

Select Screen

↑↓

Select Item

Change Field

Tab

Select Field

General Help

F10

Save and Exit

ESC

Exit

System Time

[13:51:25]

System Date

[Thu 07/09/2009]

Language

[English]

SATA1

[HDT722516DLA380]

SATA2

[Not Detected]

SATA3

[ATAPI DVD DH1]

SATA4

[Not Detected]

SATA5

[Not Detected]

SATA6

[Not Detected]

Storage Conﬁguration

System Information

BIOS SETUP UTILITY

Main

Select the type

of device connected

to the system.

←→

Select Screen

↑↓

Select Item

Change Field

General Help

F10

Save and Exit

ESC

Exit

SATA 1

Device

: Hard Disk

Vendor

: HDT722516DLA380

Size

: 164.7GB

LBA Mode

: Supported

Block Mode

: 16Sectors

PIO Mode

: 4

Async DMA

: MultiWord DMA-2

Ultra DMA

: Ultra DMA-5

SMART Monitoring:Supported

Type

[Auto]

LBA/Large Mode

[Auto]

Block(Multi-Sector Transfer)M

[Auto]

PIO Mode

[Auto]

DMA Mode

[Auto]

SMART Monitoring

[Auto]

32Bit Data Transfer

[Enabled]

The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size,

LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring). These

values are not user-conﬁgurable. These items show N/A if no SATA device is installed in the

system.