Asus SABERTOOTH 990FX R2.0 SABERTOOTH 990FX R2.0 User's Manual - Page 89
North Bridge Configuration, IOMMU [Disabled] - linux
View all Asus SABERTOOTH 990FX R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
3.5.2 North Bridge Configuration UEFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Advanced\ North Bridge > North Bridge Configuration IOMMU > Memory Configuration Advanced Monitor Disabled Boot Tool Enabled/Disabled IOMMU Initiate Graphic Adapter Starting Address: 0 KB Ending Address: 2097152 KB DIMM0: Not Present DIMM1: size=2048 MB, speed=1066 MHz DIMM2: Not Present DIMM3: Not Present PEG/PCI IOMMU [Disabled] Allows you to enable or disable the input/output memory management unit (IOMMU) Configuration options: [Enabled] [Disabled] When the IOMMU is set to [Enabled], the following item appears: IOMMU Mode [Disabled] Allows you to set the IOMMU Mode that supports LINUX-based systems to convert 32bit I/O to 64-bit memory-mapped I/O. Configuration options: [Disabled] [64MB] Memory Configuration Bank Interleaving [Auto] Allows you to enable Memory Bank Interleaving function. Configuration options: [Auto] [Disabled] Channel Interleaving [Auto] Allows you to enable Memory Channel Interleaving function. Configuration options: [Auto] [Disabled] ECC Mode [Enabled] Allows you to enable or disable the Error Correcting Code (ECC) Mode. Configuration options: [Enabled] [Disabled] Power Down Enable [Disabled] Allows you to enable or disable DDR power down mode. Configuration options: [Enabled] [Disabled] Memory Hole Remapping [Enabled] Allows you to enable or disable Memory Hole Remapping function. Configuration options: [Enabled] [Disabled] Chapter 3 ASUS SABERTOOTH 990FX R2.0 3-19