Asus SABERTOOTH 990FX R2.0 SABERTOOTH 990FX R2.0 User's Manual - Page 96
APM, SB HD Azalia Configuration
View all Asus SABERTOOTH 990FX R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
SB HD Azalia Configuration The sub-items in this menu allow you to set the SB HD Azalia configuration. HD Audio Azalia Device [Enabled] [Enabled] Enables the HD Audio Device. [Disabled] Disables the controller. The following two items appear only when you set the HD Azalia Audio Device item to [Enabled]. Azalia Front Panel [HD] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. [AC97] Sets the front panel audio connector (AAFP) mode to legacy AC'97 [HD] Sets the front panel audio connector (AAFP) mode to high definition audio. SPDIF Out Type [SPDIF] [SPDIF] Sets to [SPDIF] for SPDIF audio output. [HDMI] Sets to [HDMI] for HDMI audio output. 3.5.8 APM UEFI BIOS Utility - Advanced Mode Exit Chapter 3 Main Back Ai Tweaker Advanced\ APM > Advanced Monitor ErP Ready Disabled Restore AC Power Loss Power Off Power On By PS/2 Device Disabled Power On By PME Device Disabled Power On By Ring Disabled Power On By RTC Disabled Boot Tool Allow BIOS to switch off some power at S5 to get the system ready for ErP requirement. When set to Enabled, all other PME options will be switched off. ErP Ready [Disabled] This item allows user to switch off some power at S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options will be switched off. Configuration options: [Disabled] [Enabled] Restore AC Power Loss [Power Off] [Power On] The system goes into on state after an AC power loss. [Power Off] The system goes into off state after an AC power loss. [Last State] The system goes into either off or on state, whatever the system state was before the AC power loss. 3-26 Chapter 3: BIOS setup