Asus SABERTOOTH Z97 MARK 2 User Guide - Page 120
DirectKey DRCT [Enabled], Boot Logo Display [Auto], Bootup NumLock State [Enabled]
View all Asus SABERTOOTH Z97 MARK 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Network Stack Driver Support [Disabled] [Disabled] Select to skip the network stack driver from loading during POST. [Enabled] Select to load the network stack driver during POST. Next Boot after AC Power Loss [Normal Boot] [Normal Boot] Returns to normal boot on the next boot after an AC power loss. [Fast Boot] Accelerates the boot speed on the next boot after an AC power loss. DirectKey (DRCT) [Enabled] [Disabled] Disables the DirectKey button. The system will only power on or off when you press the DirectKey button. [Enabled] Allows the system to power on and go to the BIOS Setup directly when you press the Reset button. Connect the 2-pin connector of the chassis reset button cable to the onboard DRCT header. Boot Logo Display [Auto] [Auto] Sets the boot logo to display during POST. [Full Screen] Sets the boot logo display in full screen during POST. [Disabled] Disables the boot logo display during POST. The following item appears only when you set the Boot Logo Display to [Auto] and [Full Screen]. Post Delay Time [3 sec] This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values range from 0 to 10 seconds. This feature only works when set under normal boot. The following items appear only when you set the Boot Logo Display to [Disabled]. Post Report [5 sec] This item allows you to select a desired POST report waiting time. Configuration options: [1 sec] - [10 sec] [Until Press ESC] Bootup NumLock State [Enabled] This item allows you to enable or disable power-on state of the NumLock. Configuration options: [Disabled] [Enabled] Wait For 'F1' If Error [Enabled] This item allows your system to wait for the key to be pressed when error occurs. Configuration options: [Disabled] [Enabled] Chapter 3 3-52 Chapter 3: BIOS setup