Asus Terminator A7VT Terminator A7VT User Manual - Page 26
Installing system memory
View all Asus Terminator A7VT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2.7 Installing system memory The motherboard comes with two Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. These sockets support up to 2 GB system memory using unbuffered ECC or non-ECC PC2700/2100 DIMMs. 104 Pins 80 Pins A7VT ® DIMM2 DIMM1 A7VT 184-Pin DDR DIMM sockets 2.7.1 Memory configurations You may install any DDR DIMMs with 64 MB, 128 MB, 256 MB, 512 MB, and 1 GB densities into the DIMM sockets. Memory frequency/CPU FSB synchronization CPU FSB 100 MHz 133MHz 166 MHz DDR DIMM Type PC2700/PC2100/PC1600 PC2700/PC2100/PC1600 PC2700/PC2100/PC1600 Memory Frequency 266/266/200 MHz 333/266/200 MHz 333/266/200 MHz • When using 100 MHz CPU FSB, any DDR DIMM you installed may run only at a maximum of 266 MHz due to chipset limitation. • If you are using CPU FSB other than 100 MHz and installed 400 MHz DDR DIMMs, the memory frequency downgrades to 333 MHz. 26 Chapter 2: Basic Installation