Asus Terminator A7VT Terminator A7VT User Manual - Page 29

Expansion card installation, Configuring an expansion card - terminator drivers

Get Asus Terminator A7VT PDF manuals and user guides View all Asus Terminator A7VT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

2.8.2 Expansion card installation Follow these steps to install a PCI or AGP card. 1. Place the chassis on its side. 2. Remove the metal bracket opposite the slot that you wish to use. 3. Align the card golden fingers to the slot and its metal bracket to the slot opening on the chassis. Metal bracket PCI slot (PCI1) 4. Press the card firmly until it is properly seated on the slot. AGP slot (AGP1) 5. Secure the card to the chassis with a bracket screw. 2.8.3 Configuring an expansion card After installing the expansion card, configure it by adjusting the software settings. 1. Turn on the system and change the necessary BIOS settings, if any. See Chapter 5 for information on BIOS setup. 2. Install the software drivers for the expansion card. ASUS Terminator 1 A7VT barebone system 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
ASUS Terminator 1 A7VT barebone system
29
Follow these steps to install a PCI
or AGP card.
1.
Place the chassis on its side.
2.
Remove the metal bracket
opposite the slot that you wish
to use.
3.
Align the card golden fingers
to the slot and its metal
bracket to the slot opening on
the chassis.
4.
Press the card firmly until it is
properly seated on the slot.
5.
Secure the card to the chassis
with a bracket screw.
PCI slot (PCI1)
Metal bracket
2.8.2
Expansion card installation
2.8.3
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software
settings.
1.
Turn on the system and change the necessary BIOS settings, if any.
See Chapter 5 for information on BIOS setup.
2.
Install the software drivers for the expansion card.
AGP slot (AGP1)