Asus Terminator A7VT Terminator A7VT User Manual - Page 94
OS Select for DRAM > 64MB [Non-OS2]
View all Asus Terminator A7VT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Boot Up Floppy Seek [Enabled] When [Enabled], the BIOS will seek the flopy disk drive to determine whether the drive has 40 or 80 tracks. Configuration options: [Enabled] [Disabled] Boot Up Num-Lock Status [On] Allows you to select the power-on state for the NumLock. Configuration options: [On] [Off] Typematic Rate Setting [Disabled] Allows you to enable or disable the keyboard typematic rate setting. Set to [Enabled] to configure the Type Rate and Type Delay items. Configuration options: [Disabled] [Enabled] The items Typematic Rate (Chars/Sec) and Typematic Delay become configurable only when the item Typematic Setting is enabled. Typematic Rate (Chars/Sec) [6] Allows you to select the rate at which character repeats when you hold a key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30] Typematic Delay (Msec) [250] Allows you to set the delay before key strokes begin to repeat. Configuration options: [250] [500] [750] [1000] OS Select for DRAM > 64MB [Non-OS2] Select [OS2] only when you are using an OS2 operating system with greater than 64MB RAM. Otherwise, set to [Non-OS2]. Configuration options: [Non-OS2] [OS2] Halt On [All Errors] Sets the system to halt on errors according to the system functions specified in each option. Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All , But Diskette] [All, But Disk/Key] 94 Chapter 5: BIOS information