Asus Terminator A7VT Terminator A7VT User Manual - Page 31
Installing a CD-ROM drive
View all Asus Terminator A7VT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2.9 Installing a CD-ROM drive A CD-ROM drive is an optional item in this barebone system. Refer to the instructions in this section if you acquired a model without a CD-ROM. Follow these steps to install a CD-ROM drive. 1. Place the chassis upright. 2. Insert the CD-ROM drive into the upper 5.25-inch drive bay. 3. Carefully push the CD-ROM drive into the bay until its screw holes align with the holes on the bay as shown. 4. Secure the CD-ROM with two screws on each side of the bay. 5.25-inch drive bay CD-ROM screws ASUS Terminator 1 A7VT barebone system 31
ASUS Terminator 1 A7VT barebone system
31
2.9
Installing a CD-ROM drive
A CD-ROM drive is an optional item in this barebone system. Refer to the
instructions in this section if you acquired a model without a CD-ROM.
Follow these steps to install a
CD-ROM drive.
1.
Place the chassis upright.
2.
Insert the CD-ROM drive into
the upper 5.25-inch drive bay.
CD-ROM screws
5.25-inch drive bay
3.
Carefully push the CD-ROM
drive into the bay until its
screw holes align with the
holes on the bay as shown.
4.
Secure the CD-ROM with two
screws on each side of the
bay.