Asus Terminator A7VT Terminator A7VT User Manual - Page 78

5.4.2 Memory configuration The items in this menu show the memory configuration settings. Select an item then press to display a pop-up menu with the configuration options. Memory Configuration Current DRAM Frequency 133 MHz DRAM Clock [By SPD] DRAM Timing [Auto by SPD] x DRAM CAS Latency 2.5 x Bank Interleave Disabled x Precharge to Active (Trp) 5T x Active to Precharge (Tras) 7T x Active to CMD (Trcd) 5T DRAM Burst Length [4] DRAM Command Rate [2T Command] Write Recovery Time [3T] tWTR [2T] Select Menu Item Specific Help Set DRAM Frequency. DRAM Clock [By SPD] Sets the DRAM frequency. Configuration options: [By SPD] [133 MHz] [166 MHz] DRAM Timing [Auto by SPD] The DRAM clock is set according to DRAM SPD (Serial Presence Detect). Select [Auto by SPD] for automatic DRAM clock detection. Select [Manual] to set the DRAM Timing manually. Select [Safe] to set the DRAM timing to safe value. Configuration options: [Auto by SPD] [Manual] [Safe] DRAM Burst Length [4] Sets the DRAM burst length width. Configuration options: [4] [8] DRAM Command Rate [2T Command] Sets the DRAM command rate . Configuration options: [1T Command] [2T Command] Write Recovery Time [3T] Sets the DRAM write recovery time. Configuration options: [2T] [3T] tWTR [2T] Sets the tWTR time. Configuration options: [1T] [2T] 78 Chapter 5: BIOS information