Asus Terminator A7VT Terminator A7VT User Manual - Page 32
Basic Installation
View all Asus Terminator A7VT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
5. Connect a power cable from the power supply to the power connector at the back of the CD-ROM. Use the cable with the white connector labeled P1. 6. Connect one end of the IDE ribbon cable to the IDE interface at the back of the CD-ROM, matching the red stripe on the cable with Pin 1 on the IDE interface. 7. Connect one end of the CD-ROM audio cable to the 4-pin connector at the back of the CD-ROM. CD-ROM audio cable IDE ribbon cable Red stripe to Pin 1 Power cable (P1) 8. Connect the other end of the IDE ribbon cable to the secondary IDE connector (black connector labeled SEC_IDE) on the motherboard. 9. Connect the other end of the audio cable to the black 4-pin connector labeled CD on the motherboard. Secondary IDE connector (SEC_IDE) CD-ROM connector (CD) 32 Chapter 2: Basic Installation