Behringer PMP1000 Manual - Page 15

15 EUROPOWER PMP6000/PMP4000/PMP1000 User Manual Subwoofer F.O.H. mix Monitor mix Loudspeaker connection for F.O.H and monitor mix (mono) PMP1000 PMP4000 PMP6000 Rear panel EUROPOWER EP2000 PMP1000/PMP4000/PMP6000 Rear panel (excerpt) EUROLIVE VP1520 EUROLIVE B1800X Subwoofer 2 x BEHRINGER F1220D (active) Fig. 5.2: Bridged mono operation This illustration shows the power mixer with a sub-woofer connected to OUTPUT B. For a bridged mono operation to OUTPUT B, the AMP MODE selector switch (27) must be set to its lower position "BRIDGE". A separate stereo power amp (BEHRINGER EUROPOWER EP2000) connected to the preamp main outputs delivers the stereo main signal. Two active monitor speakers for on-stage operation are connected to the preamp monitor output. 2 x BEHRINGER EUROLIVE VP1520 (passive) 2 x BEHRINGER EUROLIVE VP1220F (passive) Fig. 5.3: Dual mono operation For a dual mono operation, the AMP MODE switch (27) must be set to its center position (MON1/MONO for PMP4000/PMP6000 or MON for PMP1000)! The two loudspeaker outputs provide the main and the monitor signals, separately from each another. Each of these signals is then sent to two speakers wired in parallel.