Behringer PMP1000 Manual - Page 21
RMS @ 1% THD, Both Channels Driven
View all Behringer PMP1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
21 EUROPOWER PMP6000/PMP4000/PMP1000 User Manual PMP1000 Microphone Inputs Type Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ohm source resistance @ 50 Ohm source resistance @ 150 Ohm source resistance Frequency response Gain Max. input level Impedance Signal-to-noise ratio Noise (THD + N) XLR, electronically balanced input circuit -134 dB / 136 dB A-weighted -131.5 dB / 134 dB A-weighted -129 dB / 155 dB A-weighted < 10 Hz - 200 kHz (-1 dB) < 10 Hz - > 200 kHz (-3 dB) +10 dB, +60 dB +12 dBu @ +10 dB gain approx. 2.6 kOhm balanced approx. 1.3 kOhm unbalanced 109 dB / 112 dB A-weighted (0 dBu In @ +10 dB gain) 0.002% / 0.0018% A-weighted Mono Line Inputs Type ¼" TS connectors, balanced Impedance approx. 20 kOhm Max. input level +21 dBu Equalizer Low Mid High 80 Hz / ±15 dB 2.5 kHz / ±15 dB 12 kHz / ±15 dB 2 Track Input Type Impedance RCA approx. 3.6 kOhm Preamp Outputs MAIN Type ¼" TRS connectors, unbalanced Impedance approx. 150 Ohm, unbalanced Max. output level +21 dBu Monitor Type ¼" TRS connectors, unbalanced Impedance approx. 150 Ohm, unbalanced Max. output level +21 dBu Stereo Outputs Type Impedance Max. input level RCA approx. 1 kOhm +21 dBu Loudspeaker Outputs Type Load impedance: MAIN L/R MONITOR/MAIN MONO MAIN MONO/MAIN MONO BRIDGE Professional locking connector 4 - 8 Ohm 4 - 8 Ohm 4 - 8 Ohm 8 - 16 Ohm DSP Converter Dynamics D/A Sampling rate Delay Time Signal run time 24-bit Delta-Sigma, 64/128-times oversampling 90 dB 46.875 kHz max. 5 secs approx. 1.5 ms (Line In > Line Out) Display Type 2-digit, 7 segment LED Output Power RMS @ 1% THD, Both Channels Driven: 8 Ohm per channel 90 W 4 Ohm per channel 130 W RMS @ 1% THD, Bridged Mode: 8 Ohm 200 W Peak Power, Both Channels Driven: 8 Ohm per channel 135 W 4 Ohm per channel 250 W Peak Power, Bridged Mode: 8 Ohm 500 W