Belkin F5D6230-3 User Manual - Page 65
Troubleshooting
View all Belkin F5D6230-3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Troubleshooting The WAN link LED is not on or I cannot connect to the cable or DSL modem. My connection type is Static IP Address. I cannot connect to the Internet. My connection type is Dynamic IP Address. I cannot connect to the Internet. 1. Check the connection between the Router and the cable or DSL modem. Make sure the network cable from the cable or DSL modem is connected to the port on the Router labeled "WAN". 2. Make sure the cable or DSL modem is powered and switched on. 3. Make sure the Router has power. The Amber LED on the bottom of the front panel should be illuminated. 4. Some cable or DSL modems require a crossover cable. Check with the manufacturer of your Cable/DSL modem for specifics about this. 1. Since your connection type is Static IP Address, your ISP must assign you the IP address, subnet mask, and gateway address. Make sure that the Router's connection type is configured as "Static IP Address" and verify your settings. 2. Your ISP may bind your connection to the MAC address of your computer's NIC. Clone your MAC address. 1. Make sure your computers are correctly configured and all network cables are properly connected. 64