Bosch 11241EVS Use and Care Manual - Page 8
Preparing and Loading the Dishware - model
UPC - 000346317886
View all Bosch 11241EVS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Preparing and Loading the Dishware (continued) Loading the Top Rack Figures 1 and 2 show typical mixed loads for the top rack. Figure 1 When the top rack is loaded, push it into the dishwasher. NOTE: When pushing the top rack into the dishwasher, push it until it stops against the back of the tub so the top rack spray arm will connect to the water supply. Figure 2 12 place setting Top Rack Accessories Top Rack Flip Tines Flip Tines fold down to make loading the racks easier in some Figure 3 instances. Grasp the tines as shown in Figure 3 and fold the tines downward. RACKMATIC™ Top Rack Height Adjustment (models SHE66C, SHV57C and SHX57C) The top rack can be lowered to accommodate large items in the top rack, and raised to make room for large items in the bottom rack. To lower the top rack: 1. Pull the top rack out of the dishwasher until it stops rolling. 2. Press the RACKMATIC™ handles inward as shown in Figure 4 and let Figure 4 the rack drop. To raise the top rack: 1. Pull the top rack out of the dishwasher until it stops rolling. 2. Grasp the top of the rack above the RACKMATIC™ handles and pull it upward as shown in Figure 5 until the RACKMATIC™ Figure 5 handles lock the rack into position (you do not need to press the RACKMATIC™ handles in order raise the rack). NOTE: Before you push the top rack back into the dishwasher, ensure that the rack height is the same on both sides. Otherwise, the dishwasher door will not shut and the top rack spray arm will not connect to the water circuit. 3. Push the top rack back into the dishwasher. 6