Bosch SHP78CM2N Installation Instructions - Page 11
Prepare Hoses and Power Cord, Install Dishwasher in Cabinet Space
View all Bosch SHP78CM2N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4.6 Prepare Hoses and Power Cord The dishwasher drain hose is configured for a sink on the left side of the installation location. If your sink is on the right side, you will need to reposition the drain hose behind the dishwasher before installing. 1. If needed, unhook the strap and reposition the drain hose per your requirements.(If your sink is to the left side, leave the hose as it came.) Installation Procedure en-us 1. Feed the power cord through the low hole in the cabinet first and then add the hoses. 2. Using both hands, push dishwasher 1/3 of the way into the cabinet and STOP. 2. Position the drain hose, water inlet hose and the power cord so they all run through the strap on the appropriate side. 3. Pull the hoses and power cord through the hole in cabinet as shown. 4. Push the unit 2/3 of the way into the opening and STOP. 3. Attach the strap back in place to secure the hoses and cord. 5. Reach into adjacent cabinet and pull hoses and excess power cord completely out so they do not get kinked. 4.7 Install Dishwasher in Cabinet Space To avoid scratching the floor, use floor protection and caution when sliding the dishwasher into the cabinet. NOTICE: Avoid Hose Kinks ▶ Be careful while pushing dishwasher in. The hoses can fold, kink or break, potentially causing an obstruction or leak. 11