Bosch SHP78CM2N Installation Instructions - Page 9

3. Use a level on the top front to see that both feet are even. (The back foot will be adjusted after it is in the cabinet.) 4.4 Attach Power Cord ▶ Plug the end of the supply cord into the back of the dishwasher. ‒ Be sure to push it all the way in until fully seated. Installation Procedure en-us and will damage the mounting brackets and the dishwasher. If you have a Fully Integrated Panel, do not attach mounting brackets until after attaching the panel to the door. WARNING Avoid tip over hazard ▶ Do not use the dishwasher until it is completely installed. When opening the door on an uninstalled dishwasher, carefully open the door while supporting the rear of the unit. Failure to follow this warning can result in serious injury. Top Mount Top Mount is used for counter tops made of wood or other materials that can be easily drilled. 1. Orient the mounting brackets and insert in the correct slot. 2. Using pliers, bend side flanges down. Do not attach to cabinet yet. The outlet for the power supply cord should be located in a cabinet or wall adjacent to the dishwasher cabinet. Do not plug dishwasher into the wall outlet until all the steps of the installation are complete. Notes ¡ Only use the included power cord. If cord is missing order kit SMZPC002UC through Customer Service. ¡ If you require a permanent wiring connection, order kit junction box accessory kit SMZPCJB1UC. ¡ If local electrical codes require clips to secure the power cord wire to the dishwasher, use accessory kit SMZEPCC1UC. 4.5 Mounting Brackets Before installing the supplied mounting brackets, decide which method of securing the dishwasher into its enclosure will be used, top (wood or porous material) or side (stone or solid surface). Once the mounting brackets are installed on the dishwasher, removing them is difficult 9