Bosch SHP78CM2N Installation Instructions - Page 12

Level the Dishwasher, Outer Door Assembly

Get Bosch SHP78CM2N PDF manuals and user guides View all Bosch SHP78CM2N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

en-us Installation Procedure 6. Finally, push the unit in until flush with cabinet door. 3. Use a level to check that your dishwasher is level. Check that the countertop is level and adjust the dishwasher to the countertop. 4.8 Level the Dishwasher Now that the dishwasher is in the cabinet, check the levels again. 1. Level side to side by turning feet clockwise to raise or counter-clockwise to lower front. 4. Make sure the top of the door is no less than 1/4" (6mm) from the underside of the counter. 2. Level front to back by turning center screw clockwise to raise or counter-clockwise to lower the back. 4.9 Outer Door Assembly ▶ Follow the instructions for outer door assembly on the fully integrated template. Note: The door panel should weigh between 9 and 18 lbs, be at least 3/4" thick, and not exceed 30 1/8" in length. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
en-us
Installation Procedure
12
6.
Finally, push the unit in until flush with cabinet door.
4.8
Level the Dishwasher
Now that the dishwasher is in the cabinet, check the levels
again.
1.
Level side to side by turning feet clockwise to raise or
counter-clockwise to lower front.
2.
Level front to back by turning center screw clockwise to
raise or counter-clockwise to lower the back.
3.
Use a level to check that your dishwasher is level.
Check that the countertop is level and adjust the
dishwasher to the countertop.
4.
Make sure the top of the door is no less than 1/4"
(6mm) from the underside of the counter.
4.9
Outer Door Assembly
▶
Follow the instructions for outer door assembly on the
fully integrated template.
Note:
The door panel should weigh between 9 and 18 lbs,
be at least 3/4" thick, and not exceed 30 1/8" in length.