Bowflex Xtreme Assembly and Owners Manual - Page 10

8 Assembly Guide Step 9 Seat Assembly Parts: • Seat Backbone • Seat Bottom Hardware: • 4 Button Head Screws (5/16" X 3/4") • 4 Washers (5/16") Tool: 3/16" Hex Wrench 9-1 Install the Seat Backbone to the underside of the Seat Pad using screws and washers as shown. Button Head Screws Flat Washers Seat Bottom Seat Backbone If you did not purchase the Optional Leg Extension, skip steps 10 and 11 and proceed to Step 12. Step 10 Optional Leg Extension Assembly Parts: • Leg Extension Backbone • 2 Chrome Tubes • 4 Foam Rollers • 4 End Caps End Caps Tool: Rubber Mallet 10-1 Insert Chrome Tubes through the upper hole and one of the lower holes in the Leg Extension. (Select hole for your comfort level.) 10-2 Slide Foam Rollers onto the Chrome Tubes and secure with end caps. A rubber mallet may be needed to secure the end caps. NOTE: The Leg Extension may be adjusted during workout to best suit your height and personal preferences. Foam Rollers Chrome Tubes Leg Extension Backbone