Bowflex Xtreme Assembly and Owners Manual - Page 7

Assembly Guide Step 3 Install Lower Lat Tower Assembly Parts: • Lower Lat Tower Assembly • Base Frame Assembly Hardware: • 2 Button Head Screws (3/8" X 3/4") • 2 Flat Washers (3/8") Tool: 7/32" Hex Wrench 3-1 Align the Lower Lat Tower Assembly over the Base Frame. Push the bottom of the Lower Lat Tower onto the connector of the Rear Cross Member as shown. 3-2 Secure Lower Lat Tower Assembly using screws and washers as shown. Do not tighten screws at this time. Button Head Screw Flat Washer Flat Washer Button Head Screw Base Frame Assembly 5 Lower Lat Tower Assembly Step 4 Install Seat Support Rail Parts: • Seat Support Rail • Base Frame Assembly Hardware: • 2 Button Head Screws (3/8" X 3/4") • 2 Flat Washers (3/8") Tool: 7/32" Hex Wrench Base Frame/ Lower Lat Tower Assembly 4-1 Slide the bottom of the Seat Support Rail onto the Base Frame connector as shown. 4-2 Slide the top of the Seat Support Rail onto the Lower Lat Tower Assembly connector as shown. Secure using screws and washers as shown. Do not tighten screws at this time. Seat Support Rail Flat Washer Button Head Screw Button Head Screw Flat Washer