Bowflex Xtreme Assembly and Owners Manual - Page 12
Upper Lat Tower Assembly, Install Seat Back Pad
View all Bowflex Xtreme manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
10 Step 13 Install Seat Back Pad Note: The back of the Seat Back Pad has two pairs of holes. Select the appropriate set based on your height. Parts: • Seat Back Pad • Main Assembly Hardware: • 2 Button Head Screws (5/16" X 2 1/2") • 2 Washers (5/16") Tool: 3/16" Hex Wrench 13-1 Position Seat Back Pad against the Seat Support Rail and align the screw holes for your height with those on the Seat Support Rail. 13-2 Secure Seat Back Pad to the Seat Support Rail using screws and washers as shown. Seat Back Pad Flat Washers Button Head Screws Step 14: Upper Lat Tower Assembly Parts: • Upper Lat Tower • Lat Cross Bar Hardware: • 2 Button Head Screws ((33//88"" XX32")1/2") • 2 Washers (3/8") Tool: 7/32" Hex Wrench 14-1 Align the two holes on the Lat Cross Bar with those on the Upper Lat Tower as shown. 14-2 Secure using washers and screws as shown. Flat Washers Hex Nuts Upper Lat Tower Lat Cross Bar Button Head Screws