Brother International BAS-326F-0 Instruction Manual - English - Page 27

Lubrication

Get Brother International BAS-326F-0 PDF manuals and user guides View all Brother International BAS-326F-0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

4. LUBRICATION 4. LUBRICATION CAUTION Turn off the power switch before starting lubricating, otherwise the machine may operate if the foot switch is depressed by mistake, which could result in injury. Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not get into your eyes or onto your skin, otherwise inflammation can result. Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and diarrhoea. Keep the oil out of the reach of children. Note 1: Fill the machine with oil when the oil level is down to about one-third full in the oil sight glass. If oil is not added and the oil drops below this level, there is the danger that the machine may seize during operation. Note 2: Be sure to let the machine operate for a while after adding the oil. Note 3: If there is no more oil on the felt of the shuttle race base, problems with sewing may result, so add oil to the felt until it is slightly soaked. Note 4: Use only specified Brother oil (Nisseki Mitsubishi Sewing Lube 10N; VG10) for the machine oil. Lubrication points 1. Fill the arm-side oil tank with oil. BAS-311F-0, 311F-L 1190S BAS-326F-0 1191S (2) (1) X direction sewing home position 1192S 2. Fill the bed-side oil tank with oil. BAS-326F-0 When filling the bed oil tank with oil, move the presser arm (1) to the X direction sewing home position so that the oil hole in the X feed base cover L assembly (2) is aligned with the oil hole in the bed, and then fill the bed oil tank with oil. BAS-311F-0, 311F-L, 326F-0 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
4. LUBRICATION
BAS-311F-0, 311F-L, 326F-0
20
4. LUBRICATION
CAUTION
Turn off the power switch before starting lubricating, otherwise the machine may operate if the foot switch is
depressed by mistake, which could result in injury.
Be sure to wear protective goggles and gloves when handling the lubricating oil and grease, so that they do not
get into your eyes or onto your skin, otherwise inflammation can result.
Furthermore, do not drink the oil or eat the grease under any circumstances, as they can cause vomiting and
diarrhoea.
Keep the oil out of the reach of children.
Note 1:
Fill the machine with oil when the oil level is down to about one-third full in the oil sight glass.
If oil is not added and the oil drops below this level, there is the danger that the machine may seize during
operation.
Note 2:
Be sure to let the machine operate for a while after adding the oil.
Note 3:
If there is no more oil on the felt of the shuttle race base, problems with sewing may result, so add oil to the felt
until it is slightly soaked.
Note 4:
Use only specified Brother oil (Nisseki Mitsubishi Sewing Lube 10N; VG10) for the machine oil.
Lubrication points
1.
Fill the arm-side oil tank with oil.
2. Fill the bed-side oil tank with oil.
BAS-326F-0
When filling the bed oil tank with oil, move the presser arm (1) to the X direction sewing home position so that
the oil hole in the X feed base cover L assembly (2) is aligned with the oil hole in the bed, and then fill the bed
oil tank with oil.
1190S
BAS-311F-0, 311F-L
1191S
BAS-326F-0
(1)
(2)
X direction sewing
home position
1192S