Brother International BAS-326F-0 Instruction Manual - English - Page 61
DIP SWITCH, 10-1. Panel DIP switch functions
View all Brother International BAS-326F-0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
10. DIP SWITCH 10. DIP SWITCH Note All DIP switches are set to OFF at the time of shipment. When changing DIP switch, the power must be off. 10-1. Panel DIP switch functions 1224S DIP switch A SW No. A-1 When ON After sewing is complete, the work clamp is raised by the operator and does not rise automatically. Various setting combinations for DIP switch No. 2, No. 3 and No. 4 can be used to change the way the work clamp is raised and lowered. For Air-type work clamps, the operation mode can be changed using the two-stage work clamp switch. SW SW SW A-2 A-3 A-4 Type Function of work clamp pedal - - - Solenoid/ Pneumatic Work clamp and presser foot rise and lower simultaneously. ON - - Solenoid/ Only work clamp rises and lowers; presser foot lowers when starting Pneumatic switch is pressed. - ON - Air For split-type presser foot, the left/right order changes alternately. ON ON - Air Only work clamp rises and lowers; presser foot lowers when starting switch is pressed. - - ON Air Work clamp and presser foot rise and lower simultaneously. ON - ON - ON ON ON ON ON Air Lowers in the order right work clamp, left work clamp, presser foot; reverse order when rising. Air Lowers in the order left work clamp, right work clamp, presser foot; reverse order when rising. Air Lowers in the order left and right work clamp, presser foot; reverse order when rising. BAS-311F-0, 311F-L, 326F-0 54