Brother International BAS-326F-0 Instruction Manual - English - Page 51

Adjusting the movable knife

Get Brother International BAS-326F-0 PDF manuals and user guides View all Brother International BAS-326F-0 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

9. STANDARD ADJUSTMENTS 9-6. Adjusting the movable knife (2) (1) Mark (3) (7) (5) (3) (4) 1294S 1295S 1. Remove the top cover (1) while making this adjustment. 2. Press down on the plunger (2) of the thread trimming solenoid as shown in the illustration, and fit the roller (3) into the groove of the thread trimmer cam (4). 3. In this condition, turn the machine pulley to align the position of the roller (3) with the mark on the thread trimmer cam (4). (1) B A (2) (3) 0142Q 1244S 4. Loosen the nut (2) and move the connecting rod lever (3) to the left or right to adjust so that the V section A is aligned with the index mark B on the needle plate when in this condition (the procedure 3.) and the movable knife (1) is pushed to the machine pulley side so that there is no play. BAS-311F-0, 311F-L, 326F-0 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
9. STANDARD ADJUSTMENTS
BAS-311F-0, 311F-L, 326F-0
44
(1)
(5)
(7)
(3)
(4)
(3)
(2)
Mark
(1)
B
A
(2)
(3)
9-6. Adjusting the movable knife
1. Remove the top cover (1) while making this adjustment.
2. Press down on the plunger (2) of the thread trimming solenoid as shown in the illustration, and fit the roller (3) into the
groove of the thread trimmer cam (4).
3. In this condition, turn the machine pulley to align the position of the roller (3) with the mark on the thread trimmer cam
(4).
4. Loosen the nut (2) and move the connecting rod lever (3) to the left or right to adjust so that the V section
A
is aligned
with the index mark
B
on the needle plate when in this condition (the procedure 3.) and the movable knife (1) is
pushed to the machine pulley side so that there is no play.
1294S
1295S
0142Q
1244S