Brother International CP-2000 Owners Manual - English - Page 19
Loading the paper, Release the bar while making sure
View all Brother International CP-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3. Operation Loading the paper In order to print out what is written on the copyboard, paper must first be loaded in the printer. The maximum diameter of the paper roll that can be installed in the copyboard is 2.6 in. (66 mm). 1 Open the paper compartment by pulling up its latch. bc Do not open the paper compart- ment while the unit is printing. 2 While gently pressing down on the center of the paper guide bar, insert the roll of paper into the paper compartment. + The paper should unroll from the top and enough paper (about 8 in. (20 cm)) should be pulled out to allow it to be torn off easily. If there is slack in the paper, tighten it by holding the core and pulling on the paper. 2 1 Be sure to pass the paper over the guide bar. 3 Release the bar while making sure that the paper feeds over it, and then lift the paper compartment cover with both hands and firmly close it. 17