Brother International CP-2000 Owners Manual - English - Page 21
Feeding the copyboard, Writing & printing - power supply
View all Brother International CP-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3. Operation Feeding the copyboard The copyboard has two writing surface areas. When you wish to use the other writing surface area, press f to scroll the writing surface without printing. bc Do not try to erase or touch the writing surface while it is moving. Do not touch the paper being fed out of the printer until it has finished feeding. Writing & printing 1 Make sure that the power supply switch on the left side of the printer is set to "|". 2 Write within the scannable area shown in the illustration below. bc Only use the enclosed Dry Erase markers or markers of the same type. The use of non-erasable markers will void the warranty. Do not allow the seam of the writing surface to become dirty. 0.12 in. (3 mm) 0.44 in. (11 mm) 0.12 in. (3 mm) 0.44 in. (11 mm) 0.44 in. (11 mm) 0.12 in. (3 mm) 0.44 in. (11 mm) 0.12 in. (3 mm) 19