Brother International CP-2000 Owners Manual - English - Page 26
Cleaning the scanner, Adjusting the print contrast, Slide the panel back onto the end of the copyboard
View all Brother International CP-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4. Maintenance Cleaning the scanner 1 Turn off the printer, unplug the AC adaptor, and then position the copyboard so that it is either lying on the floor facing up or standing up mounted on the stand or the wall. 2 Remove the top panel (remove the left panel when the printer is mounted on the long edge of the copyboard) by removing the three screws on the end of the unit. 3 Use a soft-bristle brush to gently clean the areas shaded in the illustration at the right. Also, clean out the areas at both ends of the scanner under the side covers. bc Do not exert pressure on the clear plastic. 4 Slide the panel back onto the end of the copyboard, and then re-attach it with the three screws. bc Never use chemicals to clean the scanner. Adjusting the print contrast 1 Hold down both e and f for three seconds. 2 To make the print contrast lighter, press d. To make the print contrast darker, press f F . 3 A page is printed with the current contrast setting. 24