Brother International HL5050 Users Manual - English - Page 95
Installing additional memory
UPC - 012502605645
View all Brother International HL5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Installing additional memory 1 Turn off the printer power switch, and then unplug the printer. Disconnect the interface cable from the printer. Figure 4-1 Caution Make sure you turn the printer OFF before you install or remove the DIMM. 2 Remove the side cover. Use a coin to loosen the two screws, and then remove the metal plate. Figure 4-2 3 Unpack the DIMM and hold it by the edges. Figure 4-3 Caution DIMM boards can be damaged by even a small amount of static electricity. Do not touch the memory chips or the board surface. Wear an antistatic wrist strap when you install or remove the board. If you do not have an antistatic wrist strap, frequently touch the bare metal on the printer. 4 - 2 OPTIONS
4 - 2
OPTIONS
Installing additional memory
1
Turn off the printer power switch, and then unplug the printer. Disconnect the interface cable from
the printer.
Figure 4-1
Caution
Make sure you turn the printer OFF before you install or remove the DIMM.
2
Remove the side cover. Use a coin to loosen the two screws, and then remove the metal plate.
3
Unpack the DIMM and hold it by the edges.
Caution
DIMM boards can be damaged by even a small amount of static electricity. Do not touch the memory
chips or the board surface. Wear an antistatic wrist strap when you install or remove the board. If you
do not have an antistatic wrist strap, frequently touch the bare metal on the printer.
Figure 4-2
Figure 4-3