Brother International IntelliFax-1270e Users Manual - English - Page 51
Setup Send, Before You Begin, Automatic Document Feeder (ADF - paper jam
View all Brother International IntelliFax-1270e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
6 Setup Send Before You Begin Before you begin sending faxes, make sure you read all the instructions and cautions for placing originals in the automatic document feeder. Automatic Document Feeder (ADF) I Originals must be between 5.8 and 8.5 inches wide and between 5.9 and 23.7 inches long. Your fax machine can scan an image only 8.2 inches wide, regardless of the paper width. I Make sure you place the original face down, top edge first in the ADF. I Adjust the paper guides to fit the width of your original. Paper guides I The ADF can hold up to 20 pages (17lb -20 lb), feeding each one individually through the fax machine. Use standard (17 lb -24 lb) paper when using the ADF; if you're using heavier paper, feed each sheet individually to prevent paper jams. DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples, paper clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric. I Make sure originals written with ink are completely dry. You should press Resolution (before you send the fax) to select the resolution for the type of original you're sending. (See Resolution, page 6-6.) SETUP SEND 6-1