Brother International IntelliFax-2600 Users Manual - English - Page 69

Setting Up Polled Transmit Polled Transmit is when you set up your FAX/MFC to wait with an original so another fax machine can retrieve it. (See Interrupting Delayed Fax and Polled Transmit Jobs, page 6-10.) 1 Place the original to be retrieved face down in the ADF. 2 For the FAX, press Function, 3, 8. For the MFC, press Function, 1, 3, 8. POLLED TX:OFF? SELECT & SET 3 Press or to choose POLLED TX:ON? and press Set. 1.DOC 2.MEMORY 4 Press 1 to select DOC if you want your FAX/MFC to scan the printed original at the time it is polled-OR-Press 2 to select MEMORY. 5 Press 1 if you want to select additional settings. The LCD returns to the SETUP SEND menu-OR-Press 2 if you are finished choosing settings and go to Step 6. 6 Press Start. If you pressed 1 in Step 4, the printed original remains in the ADF until your FAX/MFC is polled. However, you can "interrupt" it to send another fax. Interrupting Delayed Fax and Polled Transmit Jobs You can send a fax or make a copy now, even if you have the FAX/MFC set to send a fax later or to be polled. However, you cannot use automatic redial or the Function mode. 1 For the FAX, press Function, 5. For the MFC, press Function, 1, 5. 2 Wait 2 seconds, then remove the original that are waiting in the ADF. INSERT ORIGINAL 3 Place the "new" original you want to send or make a copy now in the ADF. 4 Enter the new fax number for the original you want to send now. 5 Press Start. 6 After the transmission is finished, place the "old" original back into the ADF. 7 For the FAX, press Function, 5, for the MFC, press Function, 1, 5, to restore the Delayed Fax and/or Polling. S E T U P S E N D 6 - 10