Brother International KE-436C Programmer Instruction Manual - English - Page 130
Ending program, Programming, Inputting the end code, when the needle point is at point A of
View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Ending program 1. Press . Lines Chapter 3 Programming with Command Function The pattern with lines is programmed. The example in the left is used for explanation of programming. Programming 1. Press . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work clamp with . Press when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 3. Input the stitch length. 3.0 mm is input in the example. Input 030 to make the stitch length to 3.0 mm. 4. Press . To change the stitch length, specify the pitch value before pressing . 5. Move the work clamp with . Press when the needle point is at point B of the pattern. 6. Repeat steps 4 and 5 and create the program to point E. Inputting the end code 1. Press at the last stitch and press . The work clamp returns to the start position. Programmer 129