Brother International KE-436C Programmer Instruction Manual - English - Page 183
Editing data, Moving symmetrically to the Y axis
View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Chapter 3 Programming with Command Function Editing data Moving symmetrically to the Y axis Command to be used Moving symmetrically to the Y axis passing the start point of sewing This function is available only when the needle is at the home position. 1. Make sure that the needle is at the home position. Press if the needle is not at the home position. 2. Input . 3. Press . Moving symmetrically to the X axis Command to be used Moving symmetrically to the X axis passing the start point of sewing This function is available only when the needle is at the home position. 1. Make sure that the needle is at the home position. Press if the needle is not at the home position. 2. Input . 182 Programmer
182
Programmer
Chapter 3 Programming with Command Function
Editing data
Moving symmetrically to the Y axis
Command to be used
Moving symmetrically to the Y axis passing the start point of sewing
This function is available only when the needle is at the home position.
1.
Make sure that the needle is at the home position.
Press
if the needle is not at the home position.
2.
Input
.
3.
Press
.
Moving symmetrically to the X axis
Command to be used
Moving symmetrically to the X axis passing the start point of sewing
This function is available only when the needle is at the home position.
1.
Make sure that the needle is at the home position.
Press
if the needle is not at the home position.
2.
Input
.