Brother International KE-436C Programmer Instruction Manual - English - Page 146
Resizing, Saving, Ending program, Input the stitch length. Press
View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Resizing 1. Move the needle to the reference point of resizing with . The pattern is resized to the home position if the needle is not moved. 2. Press and press . Input the resizing command. 3. Press and press . Input the resizing percentage for the X axis. Specify the magnification percentage by 3 digits in . 150% is specified in the example. 4. Press and press . Input the resizing percentage for the Y axis. Specify the magnification percentage by 3 digits in . 150% is specified in the example. 5. Input the stitch length. Press . If the stitch length is 0.0, the pattern is resized with the same number of stitches as the original data. Saving 1. Specify the program number on the operation panel and press the read/write switch for writing into the floppy disk. Ending program 1. Press . Chapter 3 Programming with Command Function Programmer 145