Brother International KE-436C Programmer Instruction Manual - English - Page 162
Cancelling thread breakage at the last stitch, stitch length. Press
View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Chapter 3 Programming with Command Function Canceling thread breakage at the last stitch Addition of feed after the last point can cancel thread breakage at the last stitch. When "115" is input for the end code, the thread breakage does not occur. In this case, every thread breakage including emergency stop is canceled. Carry out the following setting for canceling thread breakage at the specified point. Programming 1. Create the program 1 stitch (A) before the desired end point. 2. Press and press . 3. Move the work clamp with for the stitch length. Press when the needle point is at point B of the pattern. Point B is programmed. 4. Press . 5. Move the work clamp with . Press when the needle point is at given point C. Inputting the end code 1. Press and press . Programmer 161