Brother International MFC 845CW Cordless Handset Users Manual - English - Page 19

2 Telephone 2 Basic operation 2 Making a telephone call 2 a Pick up the cordless handset. b Enter a number using the dial pad or choose a number stored in the dialing memory. c Press (Talk). d Speak clearly toward the microphone. e Press (Off) to hang up. f Replace the cordless handset. Note If you want to make a telephone call without lifting the cordless handset, press Speaker Phone and enter the number using the dial pad. Answering calls 2 a Pick up the cordless handset from the cradle to answer the call. If your cordless handset is not in the cradle you must press answer the call. (Talk) to b To end the call, press (Off). c Replace the cordless handset. When the machine (base unit) or the cordless handset rings, instead of lifting the cordless 2 handset, and pressing (Talk) you can also press Speaker Phone on the cordless handset. Speak clearly toward the cordless handset. To end the call, press (Off). If you have a bad connection, your caller might hear your voice echoed during the call. If you experience this problem, pick up the cordless handset and press Speaker Phone to use the handset. Note Even if you answer a fax call, the machine (base unit) will receive the fax automatically. (See Easy Receive in the User's Guide.) Hold 2 If you want to put a call on hold, press the Hold/Intercom key. To release the call from hold press Hold/Intercom again. You can also transfer a call to the machine (base unit) or to another cordless handset if you have an additional optional cordless handset. (See Transferring a call at the end of a conversation on page 13.) Tone or pulse (For Canada only) 2 If you have a pulse dialing service, but need to send tone signals (for example, for telephone banking), follow the instructions below. If you have a Touch Tone service, you will not need this feature to send tone signals. a Pick up the cordless handset. b Press (Talk). 8