Brother International MFC 845CW Cordless Handset Users Manual - English - Page 35

Troubleshooting and Routine Maintenance Error Message Cause Action No Caller ID There is no incoming call history. You did not receive calls or you have not subscribed to the Caller ID service from your telephone company. If you want to use the Caller ID feature call your telephone company. (See Caller ID in the User's Guide.) Searching for The cordless handset is too far from Bring the cordless handset closer to the machine Base Unit the machine (base unit). (base unit). (Base Unit You have not registered the not detected) cordless handset. Register the cordless handset. (See Registering additional cordless handsets on page 3.) 4 Routine maintenance 4 CAUTION Charging the battery 4 If your battery is getting low, you should charge the battery. You can see the battery strength at the bottom right of the LCD. a Make sure the AC adapter of the cradle or the machine (base unit) is connected to an AC power outlet. b Place the cordless handset in the cradle with the dial pad facing forward. Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the outside surface of the cordless handset. DO NOT use cleaning materials that contain ammonia. DO NOT use isopropyl alcohol to remove dirt from the control panel. It may crack the panel. Clean the charger contacts as follows: 4 a Unplug the cradle from the AC power outlet. b Clean the charger contacts (1) for both the cordless handset and the cradle with a cotton swab. 1 Cleaning 4 Clean the outside of the cordless handset with a soft cloth. You should also clean the charger contacts. If the charger contacts are not clean, the battery may not be charged. 24