Brother International MFC 845CW Cordless Handset Users Manual - English - Page 36

Replacing the battery

Page 36 highlights

Chapter 4 Replacing the battery 4 If your battery performance is getting worse, make sure that you have charged the battery correctly. If the battery performance is still poor, it is time to replace it. WARNING Use a genuine Brother rechargeable battery (BCL-BT10). If not, it may cause damage or personal injury. d Place the battery in the correct position. e Slide the battery cover back on. CAUTION DO NOT take off the white plastic that covers the battery. a Press the area indicated (1) on the battery cover (2) and slide it off the cordless handset. 2 1 b Remove the old battery and pull out the connector. c Insert the connector (1) of the new battery (2) in the direction shown below. 2 Note • Be careful that you do not catch the battery connector cord. • After replacement, you should set the date and time. (See Date and Time on page 20.) f Charge the battery for 12 hours. (See Charging the battery on page 24.) 1 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

Chapter 4
25
Replacing the battery
4
If your battery performance is getting worse,
make sure that you have charged the battery
correctly. If the battery performance is still
poor, it is time to replace it.
WARNING
Use a genuine Brother rechargeable
battery (BCL-BT10). If not, it may cause
damage or personal injury.
CAUTION
DO NOT take off the white plastic that
covers the battery.
a
Press the area indicated (1) on the
battery cover (2) and slide it off the
cordless handset.
b
Remove the old battery and pull out the
connector.
c
Insert the connector (1) of the new
battery (2) in the direction shown below.
d
Place the battery in the correct position.
e
Slide the battery cover back on.
Note
Be careful that you do not catch the
battery connector cord.
After replacement, you should set the date
and time. (
See
Date and
Time
on page 20
.
)
f
Charge the battery for 12 hours. (See
Charging the battery
on page 24.)
1
2
1
2