Brother International MFC 845CW Cordless Handset Users Manual - English - Page 21

e Do one of the following: „ If you want to store the number, press a or b to choose Set Tel-Index. Press Menu/OK. (See Storing numbers from the Call History on page 11.) „ If you want to delete the number, press a or b to choose Delete. Press Menu/OK. Then, confirm the Delete by pressing 1. „ If you want to delete all the stored numbers, press a or b to choose All Delete. Press Menu/OK. Then, confirm the Delete by pressing 1. Note • This feature may not be available in certain areas of the USA and Canada. • (USA only) If you redial from the Caller ID history outside your area code you must set up your AREA CODE in advance. (See Setting up your area code (USA only) on page 10.) • (Canada only) You can make a call from the Caller ID history in combination with a prefix number. After you enter a prefix number manually, press Flash/Callwait. Press a or b to choose a number and press (Talk). Telephone Setting up your area code (USA only) 2 Your cordless handset will automatically dial "1" plus the area code for any number that does not originate in your area code. The cordless handset can identify local calls from your area code by entering your area code in 2 the Area Code setting. With this setting, calls returned from the caller ID history to your area code will be dialed using only 7-digits. If you must dial the area code to call within your area code, do not enter this setting. If your dialing plan does not follow the standard 1 + area code + 7-digit number dialing system for calling outside your area code, you may experience problems returning calls automatically from the caller ID history. If this is not the procedure followed by your dialing plan you will not be able to return calls automatically. a Press Menu/OK. b Press a or b to choose Area Code. Press Menu/OK. c Use the dial pad to enter your area code. Press Menu/OK. d Press (Off). Pause 2 Press Redial/Pause to put a 3.5-second pause between numbers. If you are dialing overseas, you can press Redial/Pause as many times as needed to increase the length of the pause. 10