Brother International MFC 9760 Service Manual - Page 101
NCU Shield and NCU PCB, See the illustration given on the next
View all Brother International MFC 9760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
1.21 NCU Shield and NCU PCB* (*Provided on models supporting facsimile function.) (1) Remove three screws from the NCU shield, then take off the NCU shield. (2) USA version: Disconnect the main-NCU harness from the main PCB. European version: Disconnect the main-NCU harness and main-NCU harness 2 from the main PCB. See the illustration given on the next page. (3) Remove the screw from the NCU PCB and take out the PCB. IV - 55
IV
- 55
1.21
NCU Shield and NCU PCB*
(*Provided on models supporting facsimile function.)
(1)
Remove three screws from the NCU shield, then take off the NCU shield.
(2)
USA version: Disconnect the main-NCU harness from the main PCB.
European version: Disconnect the main-NCU harness and main-NCU harness 2 from the main
PCB.
See the illustration given on the next page.
(3)
Remove the screw from the NCU PCB and take out the PCB.