Brother International MFC 9760 Service Manual - Page 67
Remove the CCD HP sensor., Remove three screws c from the motor bracket.
View all Brother International MFC 9760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
9) Pull up the CCD motor harness and disconnect it from the CCD motor. 10) Remove three screws "c" from the motor bracket. 11) Lift up the motor bracket. 12) Remove two screws "d" from the CCD motor. The scanner grounding wire also comes off. 13) Disconnect the CCD HP sensor harness from the sensor. 14) Remove the CCD HP sensor. IV - 21
IV
- 21
9)
Pull up the CCD motor harness and disconnect it from the CCD motor.
10)
Remove three screws "c" from the motor bracket.
11)
Lift up the motor bracket.
12)
Remove two screws "d" from the CCD motor. The scanner grounding wire also comes off.
13)
Disconnect the CCD HP sensor harness from the sensor.
14)
Remove the CCD HP sensor.