Brother International PT 1300 Users Manual - English - Page 12
ATTACHING LABELS, Industrial super-adhesive tape, LAMINATED TAPE
UPC - 012502526346
View all Brother International PT 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ATTACHING LABELS Industrial (super-adhesive) tape Compared to conventional laminated tape, industrial tape has a greater adhesive strength, providing better adhesion to difficult surfaces. Due to this improved adhesion, follow the precautions below when using this tape. • Do not attach this tape to skin. • Depending on the environmental conditions of the location and the quality of the material that this tape is attached to, the tape may become discolored or it may become impossible to remove it completely, possibly damaging the surface that it was affixed to. • Before using this tape, test it by affixing a small piece to an unnoticeable area of the intended surface. • If adhesive accumulated on the tape cutter makes it difficult to cut the tape, clean the tape cutter as explained on page 12. LAMINATED TAPE The enclosed tape separator enables you to easily remove the backing from labels printed on laminated tapes. 1 Hold the tape in your left hand, with the printed surface facing up, and hold the tape separator in your right hand. 2 Pass the tape halfway through the long narrow hole in the tape separator. 3 Turn the tape separator three-quarters of a turn towards you, and then pull the tape separator away from you as shown below. 4 Peel off the label backing. GH ABCDEF ABCDEF 8