Brother International PT 1300 Users Manual - English - Page 39
style, underline, frame, To change the size setting, width, lines
UPC - 012502526346
View all Brother International PT 1300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
If the AUTO size setting is selected and only one line of characters has been entered, the text can be printed with a character size slightly larger than the maximum for the installed tape under any of the following conditions. •1/2" (12-mm)- or 3/4" (18-mm)-wide tape is installed and the text contains only capital letters •3/4" (18-mm)-wide tape is installed and the characters are not formatted (i.e., the style, underline or frame setting is not applied) Tape width 1/4" 3/8" Text (6 mm) (9 mm) lines 1/2" (12 mm) 1 12 pts 18 pts All caps: 29 pts Not all caps: 24 pts 2 N/A 9 pts 12 pts 3 N/A N/A N/A 4 N/A N/A N/A 3/4" (18 mm) All caps, not formatted: All caps, formatted: Not all caps, not formatted: Not all caps, formatted: 18 pts 12 pts 9 pts 57 pts 45 pts 45 pts 36 pts To change the size setting: 1 While holding down Size Code , press 1 once, and keep Code held down to display the current size setting. 2 While still holding down Size Code , continue pressing 1 until the desired size setting is displayed. The current character size setting is also shown by the size indicators above the display. 3 Release Code to apply the selected size setting to the entire text. EXAMPLE To select the 24 point size setting: 1 While holding down Size 1 once, and keep down. Code , press Wide A A Code held SIZE AUTO Caps AAA A A A Auto Underline AA A Frame Length 35