Brother International PT-300B Users Manual - English
Brother International PT-300B Manual
 |
View all Brother International PT-300B manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International PT-300B manual content summary:
- Brother International PT-300B | Users Manual - English - Page 1
- Brother International PT-300B | Users Manual - English - Page 2
for any application. Extremely versatile, it can create characters of many sizes and styles. In addition, with the use of colorful tape cartridges, you can print labels with a variety of letter and background colors. You no longer have to worry about rushing tasks that require professional-type - Brother International PT-300B | Users Manual - English - Page 3
30 PRINTING A LABEL 32 PRINTING 32 CUTTING 33 REPEAT PRINTING 34 NUMBERING 35 MIRROR PRINTING 38 TAPE FEED 39 PHRASE MEMORY OPERATION 42 PHRASE MEMORY 42 MEMORY SIZE 42 STORING THE MESSAGE 42 RECALLING FROM PHRASE MEMORY 44 DELETING THE PHRASE MEMORY 46 MESSAGE LIST 48 TROUBLESHOOTING - Brother International PT-300B | Users Manual - English - Page 4
OVERVIEW Cover lift Tape exit slot Tape cartridge cover AC adaptor slot A A A AA CAPS STL UNDL/FRM SIZE STYLE UNDL/FRM BIG ! @ # $ 1¡ 2 3 4 Q W E R NUMBER REPEAT TAPE % 5 T INSERT ¢ 6 Y STORE RECALL M. DEL WORD OUT CLEAR & * ( ) DEL 7 8 9 0 MEMORY U I O P ü í ó - Brother International PT-300B | Users Manual - English - Page 5
Print head Tape cutter unit Tape release lever -3- - Brother International PT-300B | Users Manual - English - Page 6
Battery compartment latch Tape exit slot Battery compartment Tape cutter lever -4- - Brother International PT-300B | Users Manual - English - Page 7
cassette, advance the tape by holding down the CODE key and pressing the FEED key once. q Do not touch the print head mechanism. If the head is touched, clean it immediately with a soft wipe (e.g.cotton swab) to avoid permanent damage. q Use only the AC Adaptor, MODEL AD-30 designed exclusively for - Brother International PT-300B | Users Manual - English - Page 8
BEFORE YOU START INSERTING A TAPE CASSETTE Brother TZ tapes are only available in the following widths for this machine: 1/4"(6mm), 3/8"(9mm), 1/2"(12mm) and 3/4"(18mm). To insert a new tape cassette: (1) Lift the cassette cover so that you can reach the tape cassette easily. This will also - Brother International PT-300B | Users Manual - English - Page 9
is displayed, replace the six batteries. q Alkaline batteries are recommended. q An optional AC Adaptor is available. (Model AD-30:7V, 1.2A) Note: q When replacing batteries, do , the characters may not be printed clearly as a result of a low recharging efficiency or the operating conditions. -7- - Brother International PT-300B | Users Manual - English - Page 10
cassette, then close the tape cassette compartment cover. WARNING: Be very careful not to cut yourself when replacing the cutter. Note: The expected life of the unit's cutter is approximately 2000 cuts. CAUTION • When changing the cutter unit, be sure not to touch the cutter blade. • Make sure that - Brother International PT-300B | Users Manual - English - Page 11
To start the machine: Press the ON/OFF key. STARTING The machine's internal memory retains the last message created, and displays it when you turn on the machine. This feature allows you to stop work on a message, turn off the machine, and return to it later without having to re-enter the message. - Brother International PT-300B | Users Manual - English - Page 12
window which moves across your message. 1234567890123456789012345678901234567890123456789012345 MOVING THE CURSOR You can review and edit different parts of your message by moving the cursor backward and forward. To move and press the RELOC key to advance the cursor to the end of a message. -10- - Brother International PT-300B | Users Manual - English - Page 13
CLEAR CODE + DEL . A A A AA CAPS STL UNDL/FRM In the following examples, we will work through a sample message, first creating it, then editing it, next printing it, and finally storing it in the machine's memory. For the purpose of this example, suppose you are J. Smith, and you want to make - Brother International PT-300B | Users Manual - English - Page 14
use the functions written in pink characters. SHIFT KEY By using the SHIFT key you can type capital letters, and symbols located on the upper part of keys. To type a capital "A", hold the SHIFT key down and push the "A" key. To type a "percent" sign "%" (located above the "5"), hold the SHIFT key - Brother International PT-300B | Users Manual - English - Page 15
INPUT You can now use the keys to enter a message. Example To input "Mr.": q Press SHIFT CAPS + M ñ to input a capital M. A A A AA M CAPS STL UNDL/FRM q Complete "Mr." by pressing R then ?. / . A A A AA M r . CAPS STL UNDL/FRM -13- - Brother International PT-300B | Users Manual - English - Page 16
SPACE KEY As on a typewriter, this machine's SPACE key lets you add a blank space into your message. Note: The SPACE key and the key have different functions. The key moves the cursor forward without adding blank spaces. Example To complete the message "Mr. J Smith": Enter the initial "J": q - Brother International PT-300B | Users Manual - English - Page 17
SYMBOLS In addition to the letters, symbols, and numerals on the key tops, there are 57 symbols available in Symbol Mode. These 57 additional symbols are arranged into 15 groups, corresponding to the numbers A to O on the keyboard. Group No. A B C D E F G H SYMBOLS ÜÆ æ § + ×÷= • ®©™ [] - Brother International PT-300B | Users Manual - English - Page 18
, make sure that the cursor is located at the place where you want to add a symbol. To add a telephone symbol ( ) to the message, changing the message to "Mr. J Smith ": q Enter Symbol Mode by pressing CODE + . ALT SYMBOL q The following message will be displayed: A A A AA A-O? CAPS STL UNDL - Brother International PT-300B | Users Manual - English - Page 19
q Push SET to input a . The message should now look like this: A A A AA Mr.J Sm i t h CAPS STL UNDL/FRM After a non-keyboard symbol has been entered, the machine automatically exits from Symbol Mode. If you wish to enter another symbol, you must re-enter Symbol Mode by holding down the CODE - Brother International PT-300B | Users Manual - English - Page 20
EDITING A MESSAGE DELETING The DELETE key allows you to remove characters from your message. To delete a character: (1) Using the and keys, position the cursor one space to the right of the character you want to delete. (2) Press the DELETE key. Example To delete the from the message: q Make sure - Brother International PT-300B | Users Manual - English - Page 21
Now we will delete the blank space between the "J" and "S": q Press TOP until the cursor is positioned to the right of the blank space (under the "S"). A A A AA Mr.J S m i t h CAPS STL UNDL/FRM CLEAR q Press DEL to remove the blank space. A A A AA Mr.J S m i t h CAPS STL UNDL/FRM q Press TOP - Brother International PT-300B | Users Manual - English - Page 22
WORD OUT This function allows you to erase one word at a time, simplifying the editing of long messages. To use the WORD OUT function: (1) Position the cursor to the right of the word you want to delete. (2) Hold down the CODE key and press the WORD OUT key. A number or word located before the - Brother International PT-300B | Users Manual - English - Page 23
in its place. To type over a character: (1) Move the cursor to the character you want to change. (2) Press the character or symbol you want. The new character replaces the old one in the message. Example To replace the lower-case letters "mith" with capital letters: q Position the cursor under the - Brother International PT-300B | Users Manual - English - Page 24
add (see SYMBOLS). All characters following the insertion will move one space to the right. Example To insert a period into the message, changing it to "J. SMITH": q Position the cursor under the "S". A A A AA J SMIT H CAPS STL UNDL/FRM q Enter Insert Mode by pressing CODE INSERT ¢ +6 . q The - Brother International PT-300B | Users Manual - English - Page 25
(OVERWRITE MODE) A A A AA I: × CAPS STL UNDL/FRM (INSERT MODE) A A A AA I : CAPS STL UNDL/FRM q Release the CODE key when the display shows "I: ". q Press the ? • ' key. A A A AA J . S M I TH CAPS STL UNDL/FRM To leave INSERT Mode: Holding down the CODE key press the INSERT key again - Brother International PT-300B | Users Manual - English - Page 26
your completed message using a variety of different character sizes, styles, fonts, underline/frames and tape feed settings. Choose character size, style, underline/box and tape feed before printing the label. Note: The type of character you choose will be used for all the characters in your message - Brother International PT-300B | Users Manual - English - Page 27
To choose a character size: (1) Holding down the CODE key, press the SIZE key to change the character size. The size indicator on the display advances in the order shown. 1 W2 H2 4 8 A A A AA CAPS STL UNDL/FRM (2) Stop pressing the SIZE - Brother International PT-300B | Users Manual - English - Page 28
Note: The size of the characters that can be printed are limited by the width of the tape. Tape width 3/4"(18mm) 3/4"(12mm) 3/8"(9mm) 1/4"(6mm) Possible character sizes shown in the above table for the tape width being used and the PRINT key is pressed, an error message will be displayed and the - Brother International PT-300B | Users Manual - English - Page 29
(3) Release the CODE key when a desirable font size is selected on the display. It will change as follows: A A ASTL A1 W2 A H2 4 ND O: RN MO R M CAPS the BIG size font is selected, all lower case characters are printed in upper case, and the settings for SIZE, STYLE and UNDL/ BOX are ignored. - Brother International PT-300B | Users Manual - English - Page 30
: Normal (NORM) Italic (ITAL) Outline (OUTL) Italic + Outline (IT+O) Bold (BOLD) Italic + Bold (IT+B) Shadow (SHAD) Italic + Shadow (IT+S) Vertical (VERT) To choose a print style for your label: (1) Holding down the CODE key, press the STYLE key once. The display will show the current - Brother International PT-300B | Users Manual - English - Page 31
Note: q Only Normal style characters can be printed vertically. q Vertical printing can not be used with some tape width and character size combinations. Example To use Outline print: q Hold down CODE . STYLE q Press @ 2 until the display reads "OUTL". The style indicator turns on. A A A - Brother International PT-300B | Users Manual - English - Page 32
on the display. (3) Still holding down the CODE key, press UNDERLINE/FRAME key to change the style. It will change as follows: A A AA AA A A A A A A AA TEXT BOX4 CAPS not be printed when the Vertical is used. q Printing of the underline or frame are limited by the tape width and character size setting - Brother International PT-300B | Users Manual - English - Page 33
Tape width Possible character sizes 3/4" (18 mm) 1, W2, H2, 4, 8, BIG 1/2" (12 mm) 1, W2, H2, 4, 8 3/8" (9 mm) 1, W2, H2, 4, 8 1/4" (6 mm) 1, W2 A triangle indicator on the display appears whether Underline or Frame is set on. Box 1 Box 3 Box 2 Box 4 -31- - Brother International PT-300B | Users Manual - English - Page 34
have chosen the character size, print style and tape feed style, you are ready to print the label. To print a label: Press the PRINT key. The printed label comes out of the tape exit slot on the side of the machine. Press the CODE + FEED key before cutting the tape if TAPE FEED mode is set to or - Brother International PT-300B | Users Manual - English - Page 35
To cut the tape: Pull out the tape cutter lever on the side of the machine. Example To cut the label: q Pull out the tape cutter lever. MITH J.SMITH Note: If you pull out the tape cutter lever too far, it may break. To attach the label: Remove the label backing and attach the label at the - Brother International PT-300B | Users Manual - English - Page 36
of nine copies can be printed. q Cutting is not done automatically. q Before starting a repeat print, check that there is sufficient tape in the cartridge. q Never try to cut the tape during printing. q Press the ON/OFF key immediately if the tape runs out before all the printing is finished. (striped - Brother International PT-300B | Users Manual - English - Page 37
to set the TAPE FEED mode to "#", "##" or "###". (Please refer to page 39.) (1) Type in message to be printed. (2) Position the cursor beneath the number in the text to be incremented. Then hold down the CODE key and press the NUMBER Q NUMBER key. The display changes as follows: A A A AA - Brother International PT-300B | Users Manual - English - Page 38
the NUMBERING function: q Position the cursor beneath the number in the text to be incremented. A A A AA JU L Y 4 CAPS STL UNDL/FRM q Hold down the CODE changes as follows: A key and press the Q NUMBER key. The display A A AA 1-9? CAPS STL UNDL/FRM -36- - Brother International PT-300B | Users Manual - English - Page 39
number will automatically be incremented by one, and the text will be printed out again. q The printing operation will be repeated until the number you selected as the last number has been printed out. When printing has completed, the following display appears. A A A AA JU L Y 6 CAPS STL UNDL - Brother International PT-300B | Users Manual - English - Page 40
this application, transparent tape must be used. NOW ON SALE NOW ON SALE Mirror-printed labels attached inside the window changes between the following two messages: (MIRROR PRINTING) A A A AA A A A AA M: × M : CAPS STL UNDL/FRM CAPS STL UNDL/FRM (4) If you want to use Mirror Printing - Brother International PT-300B | Users Manual - English - Page 41
) or 1"(24mm). When continuously printing labels, the labels can be printed without extra margins. In addition, this function is very convenient when printing more than one label with multiple styles while changing the styles each time a label is printed. To change the TAPE FEED Mode: (1) Press and - Brother International PT-300B | Users Manual - English - Page 42
characters may be cut off. (See the illustrations below.) Example q When "####" is set, the tape is automatically fed 1"(24mm) after the label is printed. If the tape is cut without being fed, a label like that shown in the illustration below is produced. 1" (24mm) 1" (24mm) q When "- " is set - Brother International PT-300B | Users Manual - English - Page 43
can be used to print one label since the tape is not fed after a label is printed, different characters can be entered and the style can be changed. If the new label is printed, it will continue printing from the point where the first label stopped. After the whole label is printed, feed and cut the - Brother International PT-300B | Users Manual - English - Page 44
. These 300 characters can be divided into as many as nine areas. The maximum capacity for any single area is 55 characters. Note: When replacing batteries, do so in three minutes or less. Otherwise, unless an optional AC Adaptor is attached, any message in the working area or Phrase Memory - Brother International PT-300B | Users Manual - English - Page 45
number from 1 to 9. If all nine areas are being used, you must clear one of them before you can store your current message. Also, when 300 characters are already stored in the Phrase Memory and you try to store more, the message "FULL", will appear on the display. You must delete - Brother International PT-300B | Users Manual - English - Page 46
is on the screen, press the SET key. (6) The Phrase Memory you select is recalled into the working area for use. Note: q The character size, print style, and underline/box that are recalled are the same as those that were saved with the text. q When a message is recalled from the PHRASE - Brother International PT-300B | Users Manual - English - Page 47
SET . The message is moved to the working area and remains on the display. A A A AA J . S M ITH CAPS STL UNDL/FRM q You can see the current printing information on the display for STL, UNDL/FRM and the SIZE and BIG size settings. q You can check the style (UNDL/FRM) by pressing the - Brother International PT-300B | Users Manual - English - Page 48
DELETING THE PHRASE MEMORY To delete an area of PHRASE MEMORY: (1) Hold down the CODE key and press the M.DEL key. The following message appears on the display: A A A AA 1-9? CAPS STL UNDL/FRM (2) Select the number key (1-9) of the memory area you want to delete, and press it. The key number and - Brother International PT-300B | Users Manual - English - Page 49
To delete Phrase Memory q Press 1. The stored message appears on the display. A A A AA 1:J. CAPS STL UNDL/FRM q Press SET . The message is deleted from the memory. The message previously in the working area (in this case, the same "J. SMITH") appears on the display. Note: Before you press SET - Brother International PT-300B | Users Manual - English - Page 50
selected tape type is incorrect. The batteries are weak or empty. The working area is full (max: 55 characters) or the Phrase Memory is full (see page 42). See page 28. See page 15. See page 34, 35, 42, 44, 46. The BIG size font is selected. See page 39. Mirror printing - Brother International PT-300B | Users Manual - English - Page 51
TROUBLESHOOTING Problem 1. The display stays blank after you have turned on the machine. 2. The machine does not print, or the printed characters are blurred. 3. The printed characters are not formed properly. 4. The tape cannot be cut. 5. Striped tape appears. 6. The memory has cleared on its own. - Brother International PT-300B | Users Manual - English - Page 52
keys) Print Speed: 10 mm/sec. Character Size: Standard Size (1) Double Width (W2) Double Height (H2) Double Width & Double Height (4) 4 x Width & Double Height (8) BIG SIZE (ALL INDICATORS ON, STYLE FIXED, NO UNDERLINE/FRAME) Internal Character: Font: HELSINKI Print Tape: Pressure-sensitive - Brother International PT-300B | Users Manual - English - Page 53
ACCESSORIES q Supplies Obtain tape cassettes, AC Adaptors and tape cutters from your nearest authorized dealer. Brother cannot be held responsible for trouble caused by the use of unauthorized supplies. Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. Stock - Brother International PT-300B | Users Manual - English - Page 54
AC ADAPTER 1 TC-9 TAPE CUTTER 1 PRICE $14.99 $16.99 $18.99 $16.99 $12.99 $14.99 $17.99 PRICE $29.99 $24.99 PRICE $37.99 $24.99 PRICE $24.99 $9.99 Most retailers and distributors carry a full line of tape cassettes. If you wish to order accessories for your P-Touch direct from Brother, please - Brother International PT-300B | Users Manual - English - Page 55
TOUCH User's Guide for stock no. and price. Stock No. Description Price Quantity Total Subtotal Name: Address: City: State/Zip: Daytime Phone: SEND ORDER FORM TO: Brother Express ( ) Check/Money Order Account Number Expiration Date Signature * Prices subject to change without notice. ¢ - Brother International PT-300B | Users Manual - English - Page 56
TOUCH User's Guide for stock no. and price. Stock No. Description Price Quantity Total Subtotal Name: Address: City: State/Zip: Daytime Phone: SEND ORDER FORM TO: Brother Express ( ) Check/Money Order Account Number Expiration Date Signature * Prices subject to change without notice. ¢ - Brother International PT-300B | Users Manual - English - Page 57
GUIA DEL USUARIO - Brother International PT-300B | Users Manual - English - Page 58
en una máquina muy versátil. Aunque esta máquina es fácil de utilizar, le aconsejamos que lea atentamente este manual antes de empezar. Conserve este manual en un lugar de fácil acceso para poderlo consultar cuando sea necesario. ¡Buena suerte! Esperamos que disfrute haciendo hermosas etiquetas - Brother International PT-300B | Users Manual - English - Page 59
DE LA CUCHILLA 5 OPERACIONES DE LAS TECLAS 6 CREACION DE UN MENSAJE 7 PANTALLA 7 DESPLAZAMIENTO DEL CURSOR 7 SIMBOLOS 8 EDICION DE UN MENSAJE 9 TAMAÑO 10 ESTILO ...12 SUBRAYADO/ENCUADRE 13 IMPRESION Y CORTE 14 IMPRESIÓN REPETIDA 15 NUMERACIÓN 16 IMPRESION INVERTIDA 17 AVANCE DE LA CINTA - Brother International PT-300B | Users Manual - English - Page 60
cintas TZ Brother con esta máquina. No utilice cintas que no tengan la marca . q Las cintas están disponibles en cuatro anchuras diferentes: 1/4" (6 mm), 3/8" (9 mm), 1/2" (12 mm) y 3/4" (18 mm). q No tire de la cinta. Si lo hiciese podría dañar los cassettes de cinta. q No limpie el P-Touch con - Brother International PT-300B | Users Manual - English - Page 61
ANTES DE EMPEZAR INSERCION DE UN CASSETTE DE CINTA Las cintas TZ Brother están sólo disponibles en las anchuras siguientes para esta máquina: 1/4"(6 mm), 3/8"(9 mm), 1/2"(12 mm) y 3/4"(18 mm). Para insertar un nuevo cassette de cinta: (1) Levante la - Brother International PT-300B | Users Manual - English - Page 62
DE LAS BATERIAS La máquina usa seis baterías de tamaño "AA" (AM3, LR6, SUM-3, R6). Para insertar las pilas: (1) Dé la vuelta al P-Touch. Retire la cubierta del compartimento de las baterías presionando el pestillo y levantando la cubierta. (2) Siga los diagramas del fondo del compartimento para - Brother International PT-300B | Users Manual - English - Page 63
de la cassette de cinta. ADVERTENCIA: Tenga mucho cuidado en no cortarse cuando reemplace la cuchilla. Nota: La duración aproximada de la cuchilla del P-Touch es de unos 2000 cortes. PRECAUCIÓN • Cuando cambie la unidad de la cuchilla, cerciórese de no tocar la cuchilla de la misma. • Cerci - Brother International PT-300B | Users Manual - English - Page 64
los caracteres de color azul del de color azul de esta máquina. Tecla SHIFT Con la tecla SHIFT puede escribir mayúsculas, y símbolos de la parte superior de las teclas. Para escribir una "A" mayúscula, mantenga presionada la tecla SHIFT y pulse la tecla "A". Para escribir un signo de porcentaje (que - Brother International PT-300B | Users Manual - English - Page 65
ventana que se desplazase a lo largo del mensaje. 1234567890123456789012345678901234567890123456789012345 DESPLAZAMIENTO DEL CURSOR Puede volver a visualizar y editar una parte del mensaje desplazando el cursor hacia adelante y hacia atrás. Para desplazar el cursor a lo largo del mensaje: Pulse - Brother International PT-300B | Users Manual - English - Page 66
N.˚ de grupo A B C D E F G H SIMBOLOS ÜÆ æ § + ×÷= • ®©™ [] 1_ 2 ° 2 3 ªº n 5 2 3 4 N.˚ de grupo I J K L M N O SIMBOLOS Para entrar un símbolo que no se encuentre en la parte superior de la tecla: (1) Pulse la tecla CODE y la tecla SYMBOL para acceder al modo Symbol. (2) En la - Brother International PT-300B | Users Manual - English - Page 67
EDICION DE UN MENSAJE Para borrar un carácter: (1) Utilice las teclas del cursor para colocar éste un espacio a la derecha del carácter que desea borrar. (2) Presione la tecla DELETE. Para borrar una palabra: (1) Coloque el cursor un espacio a la derecha de la palabra que desee borrar. (2) Mantenga - Brother International PT-300B | Users Manual - English - Page 68
, 4, 8, BIG 1/2" (12 mm) 1, W2, H2, 4, 8 3/8" (9 mm) 1, W2, H2, 4, 8 1/4" (6 mm) 1, W2 q Si ajusta un tamaño de caracteres no mostrado en la tabla anterior y pulsa la tecla PRINT, se visualizará un mensaje de error y no podrá imprimirse la etiqueta - Brother International PT-300B | Users Manual - English - Page 69
1:Standard Size W2:Double Width H2:Double Height 4:Double Width & Double Height 8:4 × Width & Double Height -11- - Brother International PT-300B | Users Manual - English - Page 70
ESTILO Para elegir un estilo de impresión: Mantenga presionada la tecla CODE y pulse la tecla STYLE el número de veces necesario hasta que en la pantalla aparezca el estilo de caracteres deseado. Si selecciona un estilo que no sea NORMAL, en la pantalla aparecerá el indicador de tal estilo. Nota: - Brother International PT-300B | Users Manual - English - Page 71
SUBRAYADO/ENCUADRE Para añadir un subrayado o un encuadre: Mantenga presionada la tecla CODE y pulse la tecla UNDERLINE/FRAME UNDL/FRM # 3 el número de veces necesario hasta que en la pantalla aparezca el estilo de subrayado/encuadre deseado. Cuando haya establecido el estilo de subrayado/ - Brother International PT-300B | Users Manual - English - Page 72
estilo de impresión, y el juego tipográfico, podrá imprimir la etiqueta. Para imprimir una etiqueta: Pulse la tecla PRINT. La etiqueta impresa saldrá por la ranura de salida de la cinta de la parte lateral de la máquina. Nota: q No tire de la cinta. q No intente cortar la cinta durante la impresi - Brother International PT-300B | Users Manual - English - Page 73
tecla CODE y pulse la tecla REPEAT ( W REPEAT ). (2) Introduzca el número de veces que desee imprimir la etiqueta. (3) Pulse la tecla PRINT. Si ha ajustado TAPE FEED a "#", "##", o "###", pulse las teclas CODE + FEED antes de cortar la cinta. El corte no se realiza automáticamente. CLEAR Nota - Brother International PT-300B | Users Manual - English - Page 74
utilizar la función de cómputo automático : Se recomienda ajustar el modo TAPE FEED a "#", "##", o "###". (1) Coloque el cursor debajo del número que impresión se inhabilitará, y en la pantalla aparecerá el mensaje "ERR" cuando pulse la tecla PRINT. q Los números aumentarán en uno cada vez. q Si - Brother International PT-300B | Users Manual - English - Page 75
la cinta. Con esta función hay que utilizar una cinta con adhesivo transparente. Mantenga pulsada la tecla CODE y presione la tecla MIRROR ( PRINT MIRROR ) el número de veces necesario hasta que en la pantalla aparezca "M: ". Para volver a la impresión normal, mantenga presionada la - Brother International PT-300B | Users Manual - English - Page 76
LA CINTA Esta función podrá utilizarse para dejar márgenes iguales en la parte izquierda y derecha de la etiqueta. Los márgenes podrán ajustarse a cuatro ón de cinta : Mantenga presionada la tecla CODE y pulse la tecla TAPE el número de veces necesario hasta que en la pantalla aparezca el - Brother International PT-300B | Users Manual - English - Page 77
+ CLEAR). En la memoria de frases podrá almacenar un total de 300 caracteres. Estos 300 caracteres podrán dividirse en un total de nueve áreas, y la capacidad de la tecla y el comienzo del mensaje. Si ha seleccionado un número erróneo, podrá presionar una nueva tecla numérica para hacer que se - Brother International PT-300B | Users Manual - English - Page 78
correspondiente al área que desee borrar. En la pantalla aparecerán el número de la tecla y el comienzo del mensaje. Si ha seleccionado un número erróneo, podrá presionar una nueva tecla numérica para hacer que se visualice la frase correcta. (3) Cuando se visualice el mensaje deseado, pulse la - Brother International PT-300B | Users Manual - English - Page 79
LISTA DE MENSAJES ERR BATT FULL NORM OUTL BOLD SHAD ITAL IT + O IT + B IT + S VERT A-O? 1-9? BIG M: M: TEXT UNDL BOX 1 BOX 2 BOX 3 BOX 4 I: I: Error de entrada. El tipo de cinta - Brother International PT-300B | Users Manual - English - Page 80
ACCESORIOS q Suministros Adquiera los cassetes de cinta, los adaptadores de CA y las cuchillas de cinta en el distribuidor autorizado más cercano. Brother no asume ningún tipo de responsabilidad por problemas causados por la utilización de suministros no autorizados. Utilice solamente cintas TZ - Brother International PT-300B | Users Manual - English - Page 81
DE CINTA Cantidad /Paquete Precio 1 $24.99 1 $9.99 La mayor parte de tiendas y distribuidores tienen una línea completa de cintascassettes. Si desea hacer un pedido de accesorios para su P-Touch directamente a Brother, tenga la amabilidad de consultar el "Formulario de pedido de accesorios - Brother International PT-300B | Users Manual - English - Page 82
TO CUT TAPE, USE THE BUILT-IN CUTTER LEVER. UNDER NO CIRCUMSTANCES ATTEMPT TO CUT THE TAPE WHILE PRINTING OR FEEDING. · INSTALL AND PRESS CODE+FEED. AC adaptor connection · USE THE AC ADAPTOR DESIGNED EXCLUSIVELY FOR THIS MACHINE. - + -+ + - © BROTHER INDUSTRIES, LTD. 1995~ Printed in China
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
 |
 |
