Brother International PT-9500PC User Guide - Page 15
Check the tape cassette., Install the tape cassette., Close the tape compartment cover., Press - error light
UPC - 012502607267
View all Brother International PT-9500PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Check the tape cassette. 3 Make sure that the end of the tape is not bent and that it is routed correctly through the tape guides. Press the power button on the 6 PT-9500PC. End of the tape Tape guides Install the tape cassette. 4 Be sure to install the tape cassette in the correct direction. Power button →The power button will light (green). • If the tape compartment cover is not completely closed or if the tape cassette is not installed correctly, the ERROR lamp will light. In this case, repeat the procedure from step 2. Press the feed/cut button. 7 Close the tape compartment cover. 5 14 Feed/cut button →Remove the tape slack. Note ● If no additional operation is performed within 10 minutes after printing a label, the roller holder will automatically release and a sound may be produced. Due to this function, the tape cannot be removed if the AC adapter is removed from the PT-9500PC with the PT-9500PC turned on because the roller holder will not be released. Always turn off the PT-9500PC before removing the AC adapter from the PT-9500PC.