Brother International ULT-2003D Sewing Guide - Page 10
Quilting Stitches, Brother Ult2003d
View all Brother International ULT-2003D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Back to the Basics Guide Booklet QUILTING STITCHES BROTHER ULT2003D Many stitches used in quilting are built into the ULT2003D. For piecing fabric together with a perfect 1/4" seam or quilting the top, batting and backing together, the Brother ULT2003D can fulfill you quilting needs. • Stitch number 1-29 is the "right" piecing stitch. Using the "J" foot and aligning the fabric with the right edge of the presser foot will give a perfect ¼" seam. • Stitch number 1-30 is the "left" piecing stitch. Using the "J" foot and aligning the fabric with the left edge of the presser foot will give a perfect ¼" seam. Note: The default stitch length on these two stitches is short, creating a tight stitch. The stitch length can be adjusted if desired. • Stitch number 1-34 is a built-in 7mm wide stippling stitch for use in small areas. The stitch length can be increased for a different look. • Stitch number1-32 is a quilting appliqué stitch. It is used for appliquéing quilt blocks. • Stitch number 1-33 is a quilting appliqué stitch. It is a perfect stitch for attaching binding to a quilt. The stitch length and width can be adjusted. • Stitch number 1-31 is the hand look quilting stitch. By using clear monofilament thread on the top and colored thread on the bobbin a hand quilted look can be achieved. This works well in small areas. Increase the upper tension if needed. 8