Brother International VX-940 Users Manual - English - Page 11
Presser
View all Brother International VX-940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
p Presser Foot You will find various kinds of presser feet for special use in the accessory box. According to your sewing needs, it is required to change the presser foot. Push Screw V Removed i; SNAP-ON TYPE TO REMOVE THE FOOT 1. Raise needle to its highest position. 2. Raise presser foot. 3. Push the button, and presser foot is released easily. TO FIX PRESSER FOOT 1. Place the presser foot on the needle plate so that the pin of the presser foot is in line with shank slot. 2. Lower the presser foot lifter and the Slot presser foot is fixed easily. Pin Loosen Tighten ORDINARY TYPE (ZIPPER FOOT) 1. Raise needle to its highest position. 2. Raise presser foot. 3. Loosen presser foot thumb screw and remove presser foot shank. 4. Place grooved side of zipper foot agaihst the flat side of the presser bar. 5. Tighten the thumb screw. -9-